New KTM Inventory

CHARGED UP - MOTOR AND POWER: Providing the forward drive for the KTM SX-E 2 is a lightweight, maintenance-free 1,8 kW HUB Motor which delivers a maximum of 50 Nm. The "HUB-Motor-Concept" is void of additional parts like chains or sprockets, helping to keep the weight low and providing extra safety in the event of a crash. The controller is also integrated within the motor packaging, guaranteeing a spontaneous, but controllable power delivery. CHARGED UP - CHARGER: An external charger supplying up to 500 W can be connected to any 110- or 230-Volt socket and plugs directly into the battery pack for easy charging. Charging time from 0 - 80% take approximately 35 minutes, with a full 100% charge achieved in less than 60 minutes. STAY SAFE - SAFETY: Making sure your little ripper is safe is a top priority. For that reason, the KTM SX E-2 is fitted with a roll-over sensor that cuts power in the event of a crash or tip-over. A wrist lanyard key also provides a direct connection between the riders and the kill switch, which stops the motor in the event of an uncontrollable riding scenario. PICK YOUR POWER - MULTIFUNCTIONAL THROTTLE: As an added safety feature to ensure the KTM SX-E 2 doesn't pull away without warning, the electric motor is activated by rolling the throttle forward. Once on, a haptic 'vibration' is sent through the grip, indicating to the rider that the bike is ready to go. This and an illuminated multifunctional display located next to the throttle makes keeping an eye on selected ride modes and battery life a breeze, with different colors indicating which ride mode is selected and what level the battery is at. KEEP GOING - QUICK CHANGE LITHIUM-ION BATTERY: Powering the KTM SX E-2 comes courtesy of a 9.4 Ah, Lithium-ion power-tool-type battery with proven longevity and robustness, boasting 1500 charging cycles and up to 100 minutes of riding time. However, the real perk comes with the ease of swapping the battery with one easy movement, providing advantages like anti-ride protection, extended ride time with multiple batteries, and easy battery replacement in case of damage. Moreso, all units are rated IP65 and perfectly protected from wet conditions.GROW WITH CONFIDENCE FULL KTM SX LOOK - GRAPHICS: Using the full-sized KTM SX range as a guideline, the 2025 KTM SX E-2 features modern, striking graphics in typical "big bike" fashion. The graphics are also applied using an in-mold process, ensuring the best durability and quality for many years of offroad action. BIG BIKE DESIGN - CHASSIS: Built tough to last, the KTM SX-E 2 chassis boasts an impressive list of construction materials. The upper triple-clamp, handlebar clamps, footrest carrier, and brake components are made of high-end forged aluminum alloys, while the lower triple clamps and the shaft are crafted from forged chromoly steel. The swingarm and skid plate complete the list, made from HPDC aluminum alloy. BUILT TOUGH - FRAME: Built around a center tube Aluminum Extrusion Frame, the 2025 KTM SX-E 2 features a design concept that reduces the number of components needed, to ensure fewer connections for maximum durability and chassis rigidity. It's constructed from High-End Aluminum alloy, which strikes the perfect balance between strength and handling. The subframe is made from a high-quality glass-fiber reinforced, impact-resistant plastic composite for low weight and shock absorption. Both are painted with a black KTL coating. ALL-OUT ACTION - SUSPENSION: Ready to tackle the most challenging track conditions, the KTM SX-E 2 boasts a non-adjustable, WP regular Hydraulic Fork with 3.5 Inches travel up front and a preload-adjustable 1.3 Inch Hydraulic-mono-shock with separation piston on the rear with 2.7 Inches of travel. This is mounted to a HPDC Aluminum swingarm, the 1.3 Inch Hydraulic monoshock is matched perfectly to the front forks for exceptional balance and damping characteristics. MASTER THE TRACK - WHEELS AND TIRES: 10" wheels on the front and back ensure planted handling on all terrain types. Lightweight, black powder-coated aluminum HPDC rims front and rear provide trouble-free maintenance, while a set of exceptionally well-balanced motocross tires from KENDA provide ample grip.BALANCE POINT - LOW SEAT HEIGHT: Young riders find their feet easily thanks to a 2-level adjustable seat height. In standard configuration, the seat height is 18.5 Inches but can easily be increased to 19.6 Inches by lifting the bodywork and seat unit and mounting the rear shock in an alternative position. This, along with the ability to lower the front fork in the triple clamp and adjust the heights of the foot-peg carrier, means the rider can grow with the KTM SX-E 2. STOPPING POWER - BRAKES: A set of radial, hydraulic 5.5 Inch disk brakes on the front and rear ensure ample stopping power when the going gets too fast. Also, the hand levers are adjustable to fit smaller hand sizes, with the brake pads being compatible with high-end market bicycle brake pads for easy availability. PERFECTLY MADE TO WATCH - CONTROLS: The black anodized, aluminum alloy handlebars feature a reduced diameter grip area for the perfect ergonomic grip for little hands. The width and bend were also specifically developed for easy steering while ensuring a firm grip and control of the KTM SX-E 2. The ODI lock-on handgrips also feature a slim diameter to further improve control and feel through the bars. EASY TO HANDLE - LIGHT WEIGHT: Weighing in at 59.5 Lb, the KTM SX-E 2 feels like a real, bigger motorcycle, while still providing easy handling. The combination of weight and agility provides a planted, more secure feeling as the speed builds, and is better suited to bigger, harder bumps. Moreso, at less than 60 Lb, the KTM SX E-2 is easily transported to and from riding locations.

The KTM 390 DUKE is a pure example of what draws so many to the thrill of street motorcycling. This Corner Rocket maximizes enjoyment and user value, taking the honors wherever nimble handling counts. Light as a feather, powerful and packed with state-of-the-art technology, it guarantees a thrilling ride, whether you're fighting your way through the urban jungle or carving your name into a forest of bends.ENGINE & EXHAUSTEngine: The KTM 390 DUKE engine not only delivers arm-wrenching torque and hair-raising acceleration, but also good manners in everyday use, all with outstanding fuel economy. This lightweight, compact engine really packs a punch and with 32 kW (44 hp) it's one of the most powerful options out there for A2 riders. Thanks to the ingenious intake design and the meticulous fuel injection system, the KTM 390 DUKE is ready and waiting to tear-up the streets and the circuits alike.Power & Torque: A bike as compact and nimble as this one, deserves to pack a solid punch. With impressive power and a dry weight of just 149 kg 328.5 lbs, we did it justice. Thanks to the ingenious intake and exhaust system, the 46 mm throttle body and the meticulous fuel injection system, this strong stroker is ready to leave the rest of the traffic behind at the twist of your wrist.Slipper Clutch: Not only does the slipper clutch open when the engine back-torque becomes too high, it also assists when you open the throttle. The former prevents rear wheel chatter when braking sharply or decelerating - and gives the wheel just that bit of braking for a controlled rear wheel slide. The latter allows the clutch to be pulled and controlled with just one trigger-happy finger - saving you energy and offering greater control - just like the pros.Ride-By-Wire: It's the guarantee of a smooth throttle response, more than simply the absence of a throttle cable. The KTM 390 DUKE's ride-by-wire ensures perfect delivery of the readily available and gut-wrenching torque. It also electronically translates the throttle commands of the rider into throttle valve positions, perfectly suited to the riding conditions, making this the perfect crossover bike for both road and circuit riding.Cylinder Head: Just like the KTM 1290 SUPER DUKE R, the four valves in the cylinder head of the KTM 390 DUKE are actuated by two overhead camshafts and ultra-hard, carbon coated cam followers. The result is an ultra-reliable, long-lasting engine that produces next-level power.Injection: The intricate engine design, state-of-the-art injection electronics and close-ratio, 6-speed transmission not only help the KTM 390 DUKE to achieve white-knuckle performance, but also extremely low fuel consumption. At the same time, thanks to the regulated catalytic converter, it produces minimal emissions, even when riding at full throttle.A2 License: The KTM 390 DUKE matches all the A2 driver´s license requirements and thanks to its high power-to-weight ratio, it's one of the most dynamic options out there for new riders.Exhaust: The KTM 390 DUKE's lightweight and precision-crafted exhaust system comprises of a side exhaust, link pipe and silencer. The three-chamber silencer has been positioned close to the bike's overall center of gravity, improving balance and handling, whilst also delivering smooth, instant and beast-like power. Oh, and it looks angry as hell too. CHASSISSuspension: The KTM 390 DUKE comes as standard with ultra-lightweight, high-performance upside-down WP forks. Using the latest open-cartridge technology, these forks not only perform above expectations when pushed to the limits, but are also nice and easy to maintain. This makes them perfect for all aspects of riding, from relaxed cruising to hammering around on closed circuits and everything in between.Shock Absorber: Thanks to its progressive 150 mm spring, the KTM 390 DUKE will perform in any environment you can throw at it. The preload is adjustable, so you can count on well-balanced suspension whether you're riding solo or two-up, with or without luggage, on road or on track. The choice is yours.Wheels: As light as they are stable, the 17-inch cast alloy racing wheels help you put the power down with confidence, utilizing a 110 mm wide tire at the front and an impressive 150 mm at the rear. Wrapped in premium rubber, the pro-spec tires will keep your KTM 390 DUKE glued to the road. They offer outstanding grip in both wet and dry conditions, as well as providing supreme durability, even for riders that know how to push tires to their absolute limits.Brakes: A high-tech BYBRE braking system works in perfect harmony with the advanced ABS, providing riders with firm, controlled stopping power when they need it most. With a 320 mm brake disc on the front, paired with a 230 mm disc on the rear, the KTM 390 DUKE delivers exceptional pro-level stopping power, and you know what they say: "braking harder makes you faster!"Fuel Tank: The innovative and ergonomic 13.4 liter (3.5 gal) steel fuel tank not only provides riders with perfect knee contact for attacking every corner, but also with an unbelievably long range, even when you ride as fast as you dare all day long. ERGONOMICS & COMFORTHandlebar: Hi-tech upright handlebars offer KTM 390 DUKE riders a controlled yet aggressive body position, allowing you to dominate in all aspects of riding. From destroying corners to pulling the perfect stoppie, these bars will give you the balance and confidence you need to attack the road like never before. Clutch and brake levers are fully adjustable, allowing you to customize your cockpit to suit your individual riding style.Hand Levers: The clutch and break lever are adjustable in order to match the needs of any rider's hand type.Seats: The two-part seat offers first class sport riding ergonomics with perfect support for both rider and pillion. A seat height of 820 mm (32.3 in) enables riders to have a super-secure position, whilst also being high enough for ultimate cornering fun. The pillion seat has been integrated into the bodywork so as not to compromise the stunt-ready look of the KTM 390 DUKE, whilst also ensuring excellent comfort for the passenger. BODYWORK & GRAPHICSTFT Color Display: As an absolute first in its class, the KTM 390 DUKE boasts an innovative multicolor TFT display, presenting all the data you need to go faster in a clear-cut, uncluttered way. As you rev the engine, the display bars change color, either spurring you on or telling you to back off when the engine's still cold. The display also automatically adapts its color to best suit the light conditions around you. Innovation at its best!!!Menu Switch: Different modes for the various built-in assistance systems can be selected using an illuminated menu switch on the left side of the handlebar. It's very simple and intuitive: flick "up" and "down" through the menu, select the desired setting with the right button or go a step back with the left. Job done. Race on.LED Headlight: The aggressively styled LED headlight on the KTM 390 DUKE is a big highlight in this bike's design and a clear referral to its big brother, the KTM 1290 SUPER DUKE R. Practical as well as looking ultra-mean, it produces outstanding visibility for riding in low light or dark conditions. The parking light, which consists of 20 LEDs, ensures that the bike is highly visible to other road users, keeping you visible while you dominate the streets. SOFTWARE & ELECTRONICSRider Aids: The KTM 390 DUKE utilizes market leading technology to enhance your ride and provide you with all the assistance you need to help turn the streets into your own personal playground.ABS: Dual circuit BOSCH ABS is standard equipment on the KTM 390 DUKE. Use it to your advantage to enhance control in a range of conditions.Supermoto Mode: Thrill-seeking riders will love the added fun-factor (and extra racetrack control) of the advanced "Supermoto mode", activated at the push of a button. When engaged, the system will only control the front brake. Rear brake pressure is entirely up to the rider's right foot, allowing you to push your riding skills to the absolute limit. ENGINE SPECIFICATIONSTransmission: 6-speedCooling: Liquid cooledPower in KW: 32 kWStarter: Electric starterStroke: 60 mmBore: 89 mmClutch: PASC™ antihopping clutch, mechanically operatedDisplacement: 373 cm³EMS: Bosch EMS with RBWDesign: 1-cylinder, 4-stroke engineLubrication: Wet sump CHASSIS SPECIFICATIONSABS: Bosch 9.1MP Two Channel ABS (Supermoto ABS)Front brake disc diameter: 320 mmRear brake disc diameter: 230 mmChain: 520 X-RingFrame design: Steel trellis frame, powder coatedFront suspension: WP APEX 43Rear suspension: WP APEX - MonoshockSteering head angle: 65 ° NOTES:The illustrated vehicles may vary in selected details from the production models and some illustrations feature optional equipment available at additional cost. All information concerning the scope of supply, appearance, services, dimensions and weights is non-binding and specified with the proviso that errors, for instance in printing, setting and/or typing, may occur; such information is subject to change without notice. Please note that model specifications may vary from country to country. In the case of coated surfaces, there may be color differences due to the usual process fluctuations. The consumption values stated refer to the roadworthy series condition of the vehicles at the time of factory delivery.

When the next step up is into the 50cc class, there is no better option than the most powerful 50cc out there. For 2025, the KTM 50 SX is built around an advanced steel frame, housing a powerful engine, a 35mm WP XACT AER fork, a WP XACT monoshock, and an advanced hydraulic Formula brake system. Simply put - it's the most advanced and READY TO RACE 50 cc mini-crosser available to your little racer.Features may include:BEFORE THE GATEAdjustablityDifferent adjustability options were built into the 2025 KTM 50 SX construction using scientific statistical data and young racers' input data. Finding the right fit for your little ripper is easy thanks to height-adjustable suspension, handlebar position, subframe, and bodywork, taking the seat height from a low setting of 634mm to a taller setting of 682mm.IgnitionFitted with a digital ignition the with improved processing power making for a cleaner burn and smoother power delivery. Individual ignition timing across the entire rpm range, just like that found on the full-sized KTM SX range, adds a key advantage.CarburetorA proven Dell'Orto type PHBG 19 BS carburetor takes a prime position in producing the goods in the 2025 KTM 50 SX, that works perfectly in harmony with the engine, exhaust, and air intake design.START STRONGPerformanceThe 2025 KTM 50 SX features a modern and compact engine using the latest 2-stroke technology. Using a 3-shaft design, the crankshaft is positioned near the center of gravity, which not only benefits mass centralization but also creates the ideal intake angle into the reed valve for top-level performance. An independent cylinder blank allows for a completed cylinder design, with increased power.ClutchThe 2025 KTM 50 SX is fitted with a centrifugal clutch reducing the complexity for younger riders, and helping to boost riding confidence. The multi-disc clutch delivers a precise and predictable power delivery across the RPM range. It can be set to suit rider preferences or track conditions without using any special tools. Also, a reinforced clutch basket provides Improved durability, wear, and consistent performance.Spark PlugThere's no more worrying about breaking the plug, thanks to the 2025 KTM 50 SX featuring a spark plug from BRISK with a longer thread. Also, thanks to this innovation from BRISK, the part number is printed on the spark plugs for easy reading.CALM UNDER FIRETankThe KTM 50 SX is ready to fuel the fire in your little ripper with a tank design that compliments the frame and bodywork.Airbox and FilterThe airbox features a conventional suction sleeve made from a hard-wearing polyamide instead of rubber and a Twin Air filter mounting system that features snap locks for easy and intuitive mounting. The Twin Air filter is also placed under the seat and is easily accessible without any tools by simply removing the seat. It also features improved dirt intrusion resistance, with no more dirt falling into the intake tract when changing the filter.ErgonomicsMimicking the full-size KTM SX range, the KTM 50 SX features the same advancements found in the larger KTM SX range. Slimmer, sleeker, and better suited to standing on the pegs, the side panels now work much better with young riders' boots, allowing a proper squeezing of the bike when standing up. The front number plate incorporates plastic flaps to protect the lower triple clamps from roost, while the tank spoiler features a bicomponent technology featuring the KTM-specific texture on the upper part. Side number plates are kept as close to the frame as possible, with the general seat line sitting slightly flatter.

BEFORE THE GATEADJUSTABLITY: The 2025 KTM 65 SX is designed to grow with the little racer, by being height adjustable. Different adjustability options were built into the KTM 65 SX construction using scientific statistical data and manikins. So, finding the right fit for your little ripper is ultra easy, thanks to height adjustable suspension, handlebar position, subframe, and bodywork, taking the seat height from a low 715mm, to a taller 760mm.IGNITION: A digital ignition from Hidria finds its way onto the 2025 KTM 65 SX, with improved processing power and ignition curve, making for a cleaner burn and smoother power delivery.CARBURETOR: A proven Mikuni TM 24 carburetor takes a prime position in producing the goods in the 2025 KTM 65 SX, with settings that work perfectly in harmony with the engine, exhaust, and air intake design.CALM UNDER FIRETANK: The KTM 65 SX is ready to fuel the fire in your little ripper with a tank design that compliments the frame concept and bodywork.AIRBOX AND FILTER: The airbox features a conventional suction sleeve made from a hard-wearing polyamide instead of rubber and a Twin Air filter mounting system that features snap locks for easy and intuitive mounting. The Twin Air filter is also placed under the seat and is easily accessible without any tools by simply removing the seat. It also features improved dirt intrusion resistance, with no more dirt falling into the intake tract when changing the filter.ERGONOMICS: The bodywork of the 2025 KTM 65 SX is the perfect example of KTM's commitment to providing the ultimate starting point for young racers. Mimicking the full-size KTM SX range, the KTM 65 SX features the same advancements found in the larger KTM SX classes. Slimmer, sleeker, and better suited to standing on the pegs, the side panels now work much better with young riders' boots, allowing proper squeezing of the bike when standing up. The front number plate incorporates plastic flaps to protect the lower triple clamps from roost. At the same time, the tank spoiler features a bicomponent technology featuring the KTM-specific texture on the upper part. Side number plates are kept as close to the frame as possible, with the general seat line sitting slightly flatter.HANDLEBARS & GRIPS: Hold on tight! The high-quality, tapered, black handlebar is made of lightweight aluminum alloy and ensures top stability, vibration damping, and control. It has been designed specifically with 65cc riders in mind, featuring a bend and profile for a more READY TO RACE body position. ODI grips are mounted on the left side, while a vulcanized ODI grip is mounted on the right-side throttle assembly, with a crash pad on the handlebar protecting the rider from rough contact.FRAME: Right, this is a big one. The 2025 KTM 65 SX boasts a high-strength chromium molybdenum steel frame design with forged connecting parts integrated into the frame. This together with carefully calculated parameters of longitudinal flex and torsional rigidity, allow tailormade stiffness and an unprecedented quality of the Mini frame could be achieved. The frame layout features a typical MX design without any cross tube behind the steering head. Like our full-size models, the rear shock mount is separated from the main upper frame tube. The frame also comes with frame protectors as standard.HIT THE BIG STUFFWHEELS & TIRES: Rolling off the race rig and into the pit lane, the 2025 KTM 65 SX uses lightweight, black anodized, aluminum rims like the full-size KTM SX range. These provide the highest levels of strength and reliability, while MAXXIS MX-ST tires deliver outstanding performance on any terrain and exceptional straight-line stability.FOOTPEGS: A "no-dirt" footrests offer a bigger surface area for improved grip while standing on the pegs and are less susceptible to hooking up in deep ruts, take-offs when scrubbing, or track barriers.SUSPENSION: Featuring the latest in suspension technology, the KTM 65 SX is fitted with a state-of-the-art, lightweight 35 mm USD WP XACT AER fork. With 215 mm of wheel travel, the air unit in the left fork leg can also be adjusted easily using an air pump for rider preference, weight, or track conditions. At the rear, fully-adjustable WP XACT monoshock boasts a mounting point on the frame making it more compact, providing the perfect balance and damping characteristics to match the fork.BRAKES: Bringing the 2025 KTM 65 SX to a stop comes courtesy of floating brake calipers from Formula, with a 198 mm wave disc up front and a 180 mm wave disc at the rear. This brake assembly combination reduces wear and ensures maximum reliability and durability, while a forged rear brake lever provides the ideal rider feel and durability.MAINTAINING MOMENTUMEXHAUST: The exhaust system features the same manufacturing process as the full-size 2-stroke KTM SX range, with improved overall quality and performance. This has resulted in massive improvements in thermodynamics. Moreover, improved sealing of the silencer end cap and a rubber between the header pipe and silencer add another level of quality to the exhaust system. The silencer comes with a black anodized finish and a signature 'Braaaaap!'.RADIATOR: Using state-of-the-art Pankl radiators inspired by the full-size KTM SX range, the 2025 KTM 65 SX features the same basic design with all the hardcore cooling properties. The highlight of the cooling concept with the two radiators is the tubing connecting the radiators, which significantly improves cooling efficiency, keeping this little motor perfectly chilled under hard charges.HOUR METER: Keep track of engine hours easily, with an hour meter now mounted at the same position behind the front number plate - as on the full-size KTM SX models. This makes for easier reading and has a lower risk of dirt and water fowling up the display.GRAPHICS: Modeled after the full-size motocross bikes, the KTM 65 SX features typical READY TO RACE graphics using the time-proven in-mold application process to ensure the best durability and quality.START STRONGPERFORMANCE: Featuring the latest in 2-stroke technology, the 2025 KTM 65 SX sets the benchmark at the starting gate. Besides using the lightest and most durable materials, the engine features a pressure-controlled exhaust valve that delivers top-level performance through its manual 6-speed transmission. The mounting concept for the crankshaft also makes for easier maintenance.CYLINDER: The 2025 KTM 65 SX features a high-performance cylinder made from lightweight and durable aluminum that incorporates a pressure-controlled exhaust valve (PCEV), providing unrivaled performance.TRANSMISSION: From general durability to overall quality, the transmission maintains the same legendary performance but now presents as a more comprehensive and hardy unit. This is paired with a forged shift lever offering improved functionality, while the reliable and light hydraulic clutch system guarantees even wear and near maintenance-free operation.SPARK PLUG: There's no more worrying about breaking the plug, thanks to the 2025 KTM 65 SX featuring a spark plug from BRISK with a longer thread. Also, thanks to this innovation from BRISK, the part number is printed on the spark plugs for easy reading - even while screwed in place.EASY SERVICING: Servicing and general maintenance are made simple, thanks to draining noses for liquids and added service markers on the engine (▲) that clearly show where to use washers, making maintenance and service easier than before. Nm markings clearly show how to tighten relevant screws to avoid overtightened or too loose bolts. Many of the screws on the engine case have also been unified to the same screw length on the engine case.

There are very few sounds that can't be beaten. The crack of a soda can on a blistering hot day. The ping of the perfectly executed golf shot. And the scream of a 125 cc 2-stroke charging down a long straightaway. The 2025 KTM 125 SX takes its leads directly from the Factory Racing team and puts them to work like nothing else. Like the sound it makes, it cannot be beaten.Features may include:BEFORE THE GATENO JETS - ONLY ROCKET SHIPSElectronic Fuel InjectionPre-mix gets a remix across the 2-stroke KTM SX range, with Electronic Fuel Injection setting the standard. Now there's no more fiddly jetting setup pre-race, And thanks to the Keihin EFI and reed valve case design, you can be guaranteed of laying down optimal power at any altitude, all of the time.CHUGGA CHUGGA, RING DING DING!Electric StartPicture this; You're 7 laps into an absolute ripper of a race. You miss your line and end up stalling in a deep rut. But you don't sweat it. All you do is press the starter button and you blast off again to take the final flag. This is the reality on the 2025 KTM 125 SX. Thanks to a 12,8V 2 Ah lithium ion battery is placed under the rider's seat, a high-quality stator & pickup and super robust design, the only thing you'll be kicking - is ass.CLICK INTO ACTIONEasy Suspension AdjustmentAs always, the suspension boasts an easy tool-free setup at both ends, ensuring you chase down the podium in total control. On the rear, a hand-adjustable dual compression control allows riders to adjust high- and low-speed settings in a matter of seconds. The forks on the front end are also easily adjusted thanks to hand-adjustable clickers on the bottom of the fork shoe and top cap.START STRONGSMOOTHER POWER DELIVERYEFI + Power ValveWith EFI comes great rideability. Along with the electronic fuel injection and a power valve on the KTM 125 SX, allowing for more usable power throughout the rev range. Smoother power means better traction. Better traction means holeshot heaven!UNMATCHED PERFORMANCEPerformanceDesigned to churn out torque the 2025 KTM 125 SX is set to continue its dominance in its class with unrelenting forward momentum. With an overall engine weight of only 17.86 kg and impressive horsepower figures, this lightweight powerplant retains its typical high-revving character, while laying down the grunt where it matters most.PICK YOUR POWERSelectable MapsOnce again slicing into the 125 cc class with the leading edge of technology, the 2025 KTM 125 SX features a map select switch allowing the racer to switch between 2 engine maps. The White Map - or Map 1 - provides a linear, predictable power delivery ideally suited to attack hard-packed dirt with a leaner air-fuel mixture. Alternatively, the Green Map - Mapping 2 - is tuned for loose, thick sandy conditions with a richer mix.CALM UNDER FIRESLEEKER FOR YOU TO SCRUB CLEANERAbsolute ControlGet ready for a full-on berm assault. The 2025 KTM SX and SX-F machines have received major frame updates directly from Factory Racing efforts. For starters, the frame area around the rear shock mount has been updated and made more streamlined, with new engine mounts and cut-outs for improved chassis flex. The front area of the frame is also updated. with a different wall thickness than the previous model year, with renewed engine mounts. This adds up to a 300g weight saving and improved flex for better cornering.

It's back! After a 2-year absence, the 2025 KTM 150 SX is once again ready to tear into your favorite MX track. Get ready to experience what it feels like to be a marble launched from a slingshot. The KTM 150 SX pulls hard from the bottom, gallops in the middle, and sings at the top. Which is where it belongs.Features may include:BEFORE THE GATECLICK INTO ACTIONEasy Suspension AdjustmentAs always, the suspension boasts an easy tool-free setup at both ends, ensuring you chase down the podium in total control. On the rear, a hand-adjustable dual compression control allows riders to adjust high- and low-speed settings in a matter of seconds. The forks on the front end are also easily adjusted thanks to hand-adjustable clickers on the bottom of the fork shoe and top cap.NO JETS - ONLY ROCKET SHIPSElectronic Fuel InjectionPre-mix gets a remix across the 2-stroke KTM SX range, with Electronic Fuel Injection setting the standard. Now there's no more fiddly jetting setup pre-race, And thanks to the Keihin EFI and reed valve case design, you can be guaranteed of laying down optimal power at any altitude, all of the time.CHUGGA CHUGGA, RING DING DING!Electric StartPicture this; You're 7 laps into an absolute ripper of a race. You miss your line and end up stalling in a deep rut. But you don't sweat it. All you do is press the starter button and you blast off again to take the final flag. This is the reality on the 2025 KTM 150 SX. Thanks to a 12,8V 2 Ah lithium ion battery is placed under the rider's seat, a high-quality stator & pickup and super robust design, the only thing you'll be kicking - is ass.START STRONGSMOOTHER POWER DELIVERYEFI + Power ValveWith EFI comes great rideability. Along with the electronic fuel injection and a power valve on the KTM 150 SX, allowing for more usable power throughout the rev range. Smoother power means better traction. Better traction means holeshot heaven!UNMATCHED PERFORMANCEPerformanceMany parts of the 150 SX engine have been rearranged, modified, or developed from the ground up. With an overall weight of just below 18 kg, this is a powerhouse bar none. Designed to provide more torque than its stablemate, the KTM 125 SX, it remains true to its nature, without losing its typical high-revving lightweight 2-stroke character.PICK YOUR POWERSelectable MapsThe 2025 KTM 150 SX features a map select switch allowing the racer to switch between 2 engine maps. The White Map - or Map 1 - provides a linear, predictable power delivery ideally suited to attack hard-packed dirt with a leaner air-fuel mixture. Alternatively, the Green Map - Mapping 2 - is tuned for loose, thick sandy conditions with a richer mix.CALM UNDER FIRESLEEKER FOR YOU TO SCRUB CLEANERAbsolute ControlGet ready for a full-on berm assault. The 2025 KTM SX and SX-F machines have received major frame updates directly from Factory Racing efforts. For starters, the frame area around the rear shock mount has been updated and made more streamlined, with new engine mounts and cut-outs for improved chassis flex. The front area of the frame is also updated. with a different wall thickness than the previous model year, with renewed engine mounts. This adds up to a 300g weight saving and improved flex for better cornering.FLUID RIDER MOTIONErgonomicsUpgraded tank shrouds using bi-compound plastics channel air towards the radiators more efficiently, while a new fuel tank roll, makes for a tighter, more secure fitment, reducing the chance of frame scrubbing and dramatically improving durability.

Two years of hard-charging R&D have gone into the making of the 2025 KTM 125 XC. That's right, we meant Racing and Development. A reworked, lighter frame, updated engine mounts, and a new durable chain glide - to name a few - make the 2025 KTM 125 XC the leader in the 2-Stroke GNCC screamer class.Features may include:BEFORE THE FLAGCLICK INTO ACTIONEasy Suspension AdjustmentThe 2025 KTM XC and XC-F range took their already awesome suspension package and turned it up to 11. The WP XACT Closed Cartridge spring forks and WP XACT rear shock has been updated, with reworked settings and alterations to improve weight distribution and increase overall response. As always, the suspension boasts an easy tool-free setup at both ends, ensuring you chase down the podium in total control. On the rear, a hand-adjustable dual compression control allows riders to adjust high- and low-speed settings in a matter of seconds. The forks on the front end are also easily adjusted thanks to hand-adjustable clickers on the bottom of the fork shoe and top cap.BREATHE EASYAirboxNow a more robust one-piece construction, the airbox on the 2025 KTM XC range features a redesigned air inlet sleeve and snorkel, which prevents deformation and improves airflow. But don't fret, toolless filter access is retained, with an intuitive filter mounting system and protection against dirt intrusion.START STRONGUNMATCHED PERFORMANCEMore Usable PowerDesigned to churn out more torque than any 125 cc 2-Stroke on the market, the 2025 KTM 125 XC is set to continue its dominance in its class with unrelenting forward momentum. With an overall engine weight of only 39.37 lb and impressive horsepower figures, this lightweight powerplant retains its typical high-revving character, while laying down the grunt where it matters most.NO CARBS. MORE MUSCLEFuel InjectionWith Electronic Fuel Injection setting the standard, there's no more jetting setup pre-race, and thanks to the Keihin EFI, the ECU coming from Vitesco and reed valve case design, you can be guaranteed of laying down optimal power at any altitude, all of the time.TOTAL TRACTIONSelectable MapsOnce again slicing into the 125 cc class with the leading edge of technology, the 2025 KTM 125 XC features a map select switch as standard, allowing the racer to switch between 2 perceptible engine maps.Map 1 provides the ultimate power delivery to dominate hard-pack surfaces, while Map 2 gives you the edge in soft, sandy conditionsCALM UNDER FIRECORNER ON RAILSAbsolute ControlNo matter how gnarly the trail is, you'll stay in control thanks to a rider-focussed frame design that has not only been engineered for longitudinal rigidity, but also positions rotating mass as close as possible to the center of gravity. Thick frame walls also improve reliability, flex characteristics and offer unmatched rider feel. The shock mounting also provides the perfect amount of anti-squat for better traction out of corners, while the footpeg mounting position reduces the risk of hooking up on roots or rocks. Additionally, forged brackets on the lower frame rails allow for easy installation of the skid plate.ErgonomicsThe 2025 KTM XC and XC-F range feature upgraded tank shrouds with bi-compound plastics, which work alongside the specially-developed rider triangle, to provide unmatched knee contact and gripping surfaces - especially when standing on the pegs. While the plastics work to expel mud buildup in wet, muddy conditions, the flat seat profile and high-grip orange seat cover give exceptional rider movement and control.

BEFORE THE GATECLICK INTO ACTION - EASY SUSPENSION ADJUSTMENT: As always, the suspension boasts an easy tool-free setup at both ends, ensuring you chase down the podium in total control. On the rear, a hand-adjustable dual compression control allows riders to adjust high- and low-speed settings in a matter of seconds. The forks on the front end are also easily adjusted thanks to hand-adjustable clickers on the bottom of the fork shoe and top cap.NO JETS - ONLY ROCKET SHIPS - ELECTRONIC FUEL INJECTION: Pre-mix gets a remix across the 2-stroke KTM SX range, with Electronic Fuel Injection setting the standard. Now there's no more fiddly jetting setup pre-race, And thanks to the Keihin EFI and reed valve case design, you can be guaranteed of laying down optimal power at any altitude, all of the time.CHUGGA CHUGGA, RING DING DING! - ELECTRIC START: Picture this; You're 7 laps into an absolute ripper of a race. You miss your line and end up stalling in a deep rut. But you don't sweat it. All you do is press the starter button and you blast off again to take the final flag. This is the reality on the 2025 KTM 300 SX. Thanks to a 12.8V 2 Ah lithium ion battery is placed under the rider's seat, a high-quality stator & pickup and super robust design, the only thing you'll be kicking - is ass.CALM UNDER FIRESLEEKER FOR YOU TO SCRUB CLEANER - ABSOLUTE CONTROL: Get ready for a full-on berm assault. The 2025 KTM SX and SX-F machines have received major frame updates directly from Factory Racing efforts. For starters, the frame area around the rear shock mount has been updated and made more streamlined, with new engine mounts and cut-outs for improved chassis flex. The front area of the frame is also updated. with a different wall thickness than the previous model year, with renewed engine mounts. This adds up to a 300g weight saving and improved flex for better cornering.FLUID RIDER MOTION - ERGONOMICS: Upgraded tank shrouds using bi-compound plastics channel air towards the radiators more efficiently, while a new fuel tank roll, makes for a tighter, more secure fitment, reducing the chance of frame scrubbing and dramatically improving durability. All this works alongside the specially-developed rider triangle, to provide unmatched knee contact and gripping surfaces - especially when standing on the pegs.HARNESSING GRAVITY - MASS CENTRALIZATION: With a major emphasis placed on mass centralization, the 2025 KTM 300 SX engine is designed to centralize rotating mass for optimal operation with the chassis. This results in a lighter, more agile handling feel that simply runs rings around the competition.HIT THE BIG STUFFUPDATED SUSPENSION SETTINGS: For 2025, the KTM SX and SX-F range has given the WP XACT AER fork and WP XACT rear shock an update. This means you'll be lining up at the starting gate with re-tuned settings, reduced weight, improved weight distribution, and an increase in overall response.UNFLAPPABLE FRONT END - WP XACT FORK: Let's get the technical parts out of the way first; the 48 mm WP XACT AER forks fitted to the 2025 KTM SX and SX-F line-up features a capsulated air spring and pressurized oil chamber for progressive and consistent damping, while oil and air bypasses reduce pressure peaks. In combination with the mid-valve damping system, all this provides exceptional feedback and rider comfort. The fork also boasts new settings, which not only compliment the updated frame and rear linkage, but ensures stellar performance at all levels. Speaking of settings, these are easily adjusted via a single air pressure pre-load valve, as well as easy-access click adjusters for compression and rebound. Additionally, the air pump needed to adjust the fork's air pressure is provided as standard in the buy-pack.WP XACT SHOCK: Keeping things in check at the rear, the WP XACT rear shock has also undergone some changes for 2025 using settings directly from the KTM Factory Racing Teams The improved frame and shock geometry mean more ground clearance at the linkage, making it less susceptible to bottoming out. While we're on the topic, smaller diameter linkage bolts save weight, while new linkage seals refine rear shock response and advanced damping characteristics.RACING ON RAILS - STABILITY: An upgraded rear brake pedal finds its way onto the 2025 KTM Motocross range, adding additional stiffness, bending resistance and braking feel to the overall package. At the other end, a forged steering head connection and CNC-milled triple clamps, make for the perfect alignment of the fork tubes. This precise geometry of the fork clamps ensures highly responsive and smooth fork action – not to mention unwavering stability when charging across ruts and onto the podium.TIRES: Getting power hooked into the dirt is a tough job. However, hours of research and testing have led the 2025 KTM Motocross range to the Dunlop GEOMAX MX34. Providing unmatched stability and control at the highest level, these rubber hoops feature a new carcass and rubber compound that improves damping and absorption, maintaining performance up to 30% longer. New Progressive Cornering Block Technology also improves grip in the berms, while a new rear pattern with 11% taller and 44% wider center block for increased traction and control everywhere else. Lastly, this unique block arrangement works to dispel mud buildup, ensuring traction in even the muddiest of track conditions.MAINTAINING MOMENTUMUNOBTRUSIVE IMPACT - ENERGY ABSORPTION: Besides the expertly crafted, hydro-formed, laser-cut, and robot-welded frame being engineered to provide exceptional rider feedback and straight-line stability, it consists of specifically calculated parameters of longitudinal and torsional flex. This means the frame acts as a "shock absorber" of sorts, making for a less harsh ride, resulting in less rider fatigue over many hard laps.NOTHING TO HOLD YOU BACK - GROUND CLEARANCE: No one enjoys a bad hook-up. Good thing, then that the shock absorber geometry on the 2025 KTM 300 SX improves ground clearance of the linkage, with the topology-optimized die-cast footpegs being less susceptible to hooking on deep ruts, and take-offs when scrubbing.PRECISE, LAP AFTER LAP - CONSISTENCY: A new chain guide and chain guard result in improved durability and minimize the chances of hooking on external objects - especially in extremely muddy conditions while reducing dirt build-up around the swingarm and rear sprocket.START STRONGSMOOTHER POWER DELIVERY - EFI + POWER VALVE: With EFI comes great rideability. Along with the electronic fuel injection and a power valve on the KTM 300 SX, allowing for more usable power throughout the rev range. Smoother power means better traction. Better traction means holeshot heaven!UNMATCHED PERFORMANCE - PERFORMANCE: The new 300 cc 2-stroke powerhouse brings a new choice of weapon into the MX Open category and provides more choice for racers looking for maximum power at the least possible weight. Along with low maintenance costs, an overall engine weight of just 52.6 lbs (23.9 kg), the 2025 KTM 300 SX provides pure performance. And then some.PICK YOUR POWER - SELECTABLE MAPS: The 2025 KTM 300 SX features a map select switch allowing the racer to switch between 2 engine maps. Map 1 provides a linear, predictable power delivery, while Map 2 gives it the full beans with crisp, explosive power output.

Ripping towards its 14,000 RMP limiter, the 2025 KTM 250 XC-F continues the trend of being undisputedly READY TO RACE. With a reworked frame, improved suspension, class-leading electronics - and an engine that continues to deliver the goods, the 2025 KTM 250 XC-F is ready to maintain its top step on the podium.BEFORE THE FLAGCLICK INTO ACTION - EASY SUSPENSION ADJUSTMENT: The 2025 KTM XC and XC-F range took their already awesome suspension package and turned it up to 11. The WP XACT Closed Cartridge spring forks and WP XACT rear shock has been updated, with reworked settings and alterations to improve weight distribution and increase overall response. As always, the suspension boasts an easy tool-free setup at both ends, ensuring you chase down the podium in total control. On the rear, a hand-adjustable dual compression control allows riders to adjust high- and low-speed settings in a matter of seconds. The forks on the front end are also easily adjusted thanks to hand-adjustable clickers on the bottom of the fork shoe and top cap. BREATHE EASY - AIRBOX: Now a more robust one-piece construction, the airbox on the 2025 KTM XC range features a redesigned air inlet sleeve and snorkel, which prevents deformation and improves airflow. But don't fret, toolless filter access is retained, with an intuitive filter mounting system and protection against dirt intrusion.CALM UNDER FIRECORNER ON RAILS - ABSOLUTE CONTROL: No matter how gnarly the trail is, you'll stay in control thanks to a rider-focused frame design that has not only been engineered for longitudinal rigidity, but also positions rotating mass as close as possible to the center of gravity. Thick frame walls also improve reliability, flex characteristics and offer unmatched rider feel. The shock mounting also provides the perfect amount of anti-squat for better traction out of corners, while the footpeg mounting position reduces the risk of hooking up on roots or rocks. Additionally, forged brackets on the lower frame rails allow for easy installation of the skid plate. ERGONOMICS: The 2025 KTM XC and XC-F range feature upgraded tank shrouds with bi-compound plastics, which work alongside the specially-developed rider triangle, to providing unmatched knee contact and gripping surfaces - especially when standing on the pegs. While the plastics work to expel mud buildup in wet, muddy conditions, the flat seat profile and high-grip orange seat cover providing exceptional rider movement and control. A handy grip pocket under the seat, just above the airbox, makes gripping the bike and lifting it much easier. UNMATCHED PERFORMANCE - GO THE DISTANCE: You call it a fuel tank. We call it a 8.5 liters race bucket. For 2025, the transparent polythene fuel tank has been upgraded with a new fuel tank roll - which not only secures the tank more firmly in place, and allows for easy fuel level monitoring - it also protects the frame from unwanted scrubbing and race rash.HIT THE BIG STUFFHARNESSING GRAVITY - MASS CENTRALIZATION: The 2025 KTM XC and XC-F range receive some major frame updates directly from Factory Racing efforts. For starters, the frame area around the rear shock mount has been updated, and more streamlined. The front area of the frame is also updated. with a different wall thickness compared to the previous model year, with renewed engine mounts. This adds up to a 300g weight saving, and improved flex for better cornering behavior. UNFLAPPABLE FRONT END - WA XACT FORK: Reworked settings find them into the WP XACT Closed Cartridge spring forks for the 2025 KTM XC and XC-F line-up, to ensure stellar performance alongside the updated frame and rear linkage. While full adjustability and proper READY TO RACE credentials remain. ALL-OUT TRACTION - WP XACT SHOCK: As with the front end, the WP XACT rear shock has also undergone some changes for 2025. Reworked settings to account for the updated frame, and rear linkage, changes for stiffness and that weight saving, make the 2025 KTM XC range even more READY TO RACE. This, along with full adjustability, 300 mm of travel, and unmatched out-the-box ability, make this the ideal setup for cross-country domination.MAINTAINING MOMENTUMWELCOME TO NEXT LEVEL MOTO - CONNECTIVITY UNIT OFFROAD: Riders - meet your new secret weapon. Available in the KTM PowerParts catalog as a must-have addition to the KTM XC-F range, the Connectivity Unit Offroad offers a wide range of functionalities and adjustability options via the KTMconnect app. The CUO gives you a new insight into your riding, allows you to alter your engine behavior, and even provides you with optimized suspension settings based on individual preferences and riding conditions. Welcome to the next level moto. UNOBTRUSIVE IMPACT - ULTIMATE RIGIDITY: A new chain guide and chain guard result in improved durability and minimize the chances of hooking on external objects. Especially in extremely muddy conditions, while reducing dirt build-up around the swingarm and chain guard. This, together with this new hollow, die-cast aluminum swingarm, means optimal stiffness and reliability at the lowest possible weight. Now that's a Win-Win. FLAT OUT TO THE FINISH - CONSISTENCY: The compact and lightweight DOHC cylinder features a short profile with the camshaft located as close to the center of gravity as possible. Lightweight valves are actuated via a DLC coated finger followers with optimized timing, specifically designed to deliver precise levels of torque and throttle response. The diameter of the intake valves is 32.5 mm, while on the exhaust it is 27.5 mm. The intake ports also allow higher flow coefficients, resulting in a more efficient and powerful engine, with the valve cover reducing the number of mounting screws, and a single oil spray jet guarantees efficient cooling while keeping the weight low.START STRONGUNMATCHED PERFORMANCE - MORE USABLE POWER: Weighing in at a lightweight 57.5 lb, this mid-weight powerhouse is the undisputed performance leader in the 250 cc 4-stroke class. Designed and tuned to provide the best performance and handling characteristics possible, the DOHC engine in the 2025 KTM 250 XC-F delivers endless mid-range and the top-end power together with the benefits of mass centralization and ideal anti-squat behavior. DROP THE CLUTCH - LAUNCH CONTROL & QUICKSHIFTER: Launch control, ENGAGED! Designed for the holeshot, the 2025 KTM 250 XC-F comes standard with launch control and a Quickshifter function, allowing for fast upshifts without using the clutch. Launch control is easily engaged by pressing the traction control and Quickshifter buttons simultaneously and works by limiting the amount of power to the rear wheel, improving traction, and preventing loss of control under hard acceleration. Meanwhile, the Quickshifter function means you can bang through from 2nd to 6th gear with your focus solely on the first corner. TOTAL TRACTION - SELECTABLE MAPS + TC: The map select switch on the 2025 KTM 250 XC-F features a simpler design, allowing for easier functionality in switching between 2 engine maps. Map 1 provides a more linear power curve, while map 2 punches all-out with aggressive throttle and explosive power. Luckily, Traction control is easy toggled to an on or off position from the same switch, ensuring maximum traction and a distinct advantage in wet or muddy conditions.

BEHIND THE BARSRALLY INSPIRED - BODYWORK: A completely reworked and striking front end gives the KTM 790 ADVENTURE true READY TO RACE looks. In addition, the structure below the fairing makes use of 2 forged aluminum brackets that provide maximum stiffness to the front mask, windshield, and instrument tower. This, along with using in-mold graphics for durability and a low front fender designed to keep unwanted water and mud spray to a minimum, makes the KTM 790 ADVENTURE ready for any adventure. ADVENTURE READY - CTG: For 2024, the KTM 790 ADVENTURE is undeniably READY TO RACE with two new color ways, an all-new white with orange graphics and a black option. The graphics are produced with in-mold technology instead of stickers raising the level of finish and durability. PLAIN SAILING - AERODYNAMICS: Despite its shorter windshield, the aerodynamics of the KTM 890 ADVENTURE R serve a dual function. On the one hand, the lower profile allows the rider to move around the bike freely when standing on the pegs - and offers an unobstructed view ahead. On the other, and together with the reworked bodywork, it provides optimized protection from windblast while barrelling down the highway to the next trail. COMMAND CONTROL - UPGRADED TFT DISPLAY: A state-of-the-art full 5" TFT display keeps you informed with everything you need to know about the machine below you. Featuring improved functionality, each function is illustrated by an infographic of the motorcycle to directly show the user the relevant field of adjustment. An optically bonded mineral glass display ensures optimum scratch and glare resistance. Additionally, an optional Connectivity Unit allows the connection between the KTMconnect app and the TFT via Bluetooth for Turn-by-Turn+ navigation, music, incoming calls. FREEDOM OF MOVEMENT - ERGONOMICS: With tank spoilers and rear side panels slightly wider than the seat, hitting the long road to nowhere is easier thanks to improved rider movement. This also helps with reduced wear and tear on the seat, while the slim shape of the fuel tank is optimized for precise handling and control when standing on the pegs. TECH FEST - TECHNOLOGY: The 2023 KTM 790 ADVENTURE brings unmatched technology to the trail. Boasting an arsenal of rider aids, ride modes, ABS and traction control features - as well as smartphone connectivity - it rules the mid-weight adventure bike roost. The riding experience can be further enhanced with optional additions like Quickshifter+ and Cruise Control, with the introduction of a Demo Mode, that allows you to test the tech on the first 1.500km.HIT THE STREETKEEEPING YOU MOVING - RIDER AIDS: KTM rider aids are developed to enhance the overall ADVENTURE experience by providing more control in different riding scenarios. ABS, MTC, and specially engineered RIDE MODES allow you to get the most out of your machine when barreling down the tarmac on your way to the rough stuff. UNMATCHED TRACTION - MTC (MOTORCYCLE TRACTION CONTROL): Making use of the latest generation of KTM MTC, traction is improved by using an advanced 6D Inertial Measurement Unit. This not only regulates and controls any slip at the rear wheel but also prevents uncontrolled lifting of the front wheel. With these two forces combined, the motorcycle is guaranteed the best possible acceleration. And when further combined with the data collected from the lean angle sensor, the system detects and controls power wheelies and ensures stability as well as smooth wheel landing and acceleration. FULL CONFIDENCE IN THE CORNERS - CORNERING ABS: Grab a handful of brakes with total confidence thanks to a new 9.3 MP ABS unit. This allows riders to use full braking power mid-corner with the 6D-sensor doing all the hard work. The 6D-sensor works by continuously monitoring and evaluating the current dynamic state of the motorcycle, enhancing control and stability during braking. Also, this level of ABS technology is unmatched, providing precise and efficient stopping power. RIDE ALL DAY - SEAT COMFORT: The one-piece seat on the KTM 890 ADVENTURE R is developed to offer unhindered movement when charging over hardcore offroad terrain but also to offer comfort on long road-going touring. For riders looking for more usability from their perch, heated ergonomic rider & passenger seats are available in the PowerParts catalog.ON THE DIRTDOMINATE THE DIRT - OFFROAD ABS: For the 2024 KTM 790 ADVENTURE, Offroad ABS is automatically toggled when you've selected Offroad or optional Rally Mode. This means ABS functionality is reduced on the front wheel, and completely deactivated on the rear, allowing riders to slide the back-end into a corner. Simply put - more braking power and control in the dirt when you need it, with the ability to shred the trail when you don't. READY TO SHRED - TIRES: The 2023 KTM 890 ADVENTURE is fitted with new, offroad-oriented PIRELLI SCORPION STR rubber. These are ideal for riders looking for durability, handling, and mileage on road, but with the added benefit of being able to conquer offroad tracks and trails with ease. TUNED TO TRAVEL - REWORKED SUSPENSION: Upfront, the 43 mm WP APEX open cartridge upside-down front fork has been specifically set up for adventure riding. Split function technology separates the compression and rebound damping between the two fork legs, with suspension travel set to 200 mm. On the rear, a WP APEX shock absorber keeps the ride smooth and balances typical KTM performance riding with all-day riding comfort.ON THE RIDEREADY TO RACE - ENGINE: The 2024 KTM 790 ADVENTURE is powered by an improved EURO5 790 cc parallel-twin compared to its predecessor. A reworked clutch with better lubrication and new clutch discs makes for smoother shifting, while a 20% increase in crankshaft weight helps smoothen the ride even more. An additional knocking control system also means fewer worries when filling up with poorer grade fuel in far away places. ENGINEERED TO RIDE - FRAME: The overall geometry of the KTM 790 ADVENTURE was developed for light handling, and comfort on long-distance exploration missions - with unchallenged offroad capability. Strength was a big consideration in the design, so a tubular Chromoly steel frame is used with the engine acting as a stressed member to reduce weight and overall size. An all-new engine protector also adds a little more piece of mind when out of the trail. All design and engineering innovations are focused on being compact and light. FULLY-LOADED - SUBFRAME: Featuring a lightweight and solid construction, the subframe is fully-loaded for adventure. The motorcycle beneath you needs to be built to last. The steel trellis subframe was developed to be compact, lightweight and also strong enough to carry a full load of luggage as well as a passenger under the hardest conditions while extreme adventure riding. ROCK SOLID - STABILITY: The 2024 KTM 790 ADVENTURE is rock solid at any speed, thanks to a high-end steering damper. Engineered to provide unflappable composure at all times, the steering damper works to keep the front end stable when flicking through tight turns, or hauling over corrugated surfaces.

With over a decade of racing - and winning - under its seat, the KTM 350 SX-F has long shed its underdog label and proven itself a worthy adversary. Delivering usable power throughout the rev range, unwavering stability at speed, and true championship-winning credentials, the 2025 KTM 350 SX-F is once again READY TO RACE.BEFORE THE GATECLICK INTO ACTION - EASY SUSPENSION ADJUSTMENT: As always, the suspension boasts an easy tool-free setup at both ends, ensuring you chase down the podium in total control. On the rear, a hand-adjustable dual compression control allows riders to adjust high- and low-speed settings in a matter of seconds. The forks on the front end are also easily adjusted thanks to hand-adjustable clickers on the bottom of the fork shoe and top cap. BREATHE EASY - AIRBOX: Designed to provide maximum airflow, the air filter box is designed with precisely positioned inlet ducts aimed at preventing air deformation and maintaining filter protection. The Twin Air filter and air filter support design feature a simple fail-proof mounting system for secure and accurate filter installation, ensuring the air filter is easily accessed, without tools, by removing the left side panel, for easy track-side maintenance. A vented air filter box cover is also included for all SX and SX-F models in the by-pack. LESS FOCUS ON THE TOOL, MORE FOCUS ON THE TRACK - SERVICEABILITY: The 2025 KTM SX and SX-F range is engineered and designed to provide riders with easy-to-access service parts, as well as suspension adjustability. This allows faster track-side and off-season maintenance, as well as making motocross more accessible for novice riders without pit crews.CALM UNDER FIRESLEEKER FOR YOU TO SCRUB CLEANER - ABSOLUTE CONTROL: Get ready for a full-on berm assault. The 2025 KTM SX and SX-F machines have received major frame updates directly from Factory Racing efforts. For starters, the frame area around the rear shock mount has been updated and made more streamlined, with new engine mounts and cut-outs for improved chassis flex. The front area of the frame is also updated. with a different wall thickness than the previous model year, with renewed engine mounts. This adds up to a 300g weight saving and improved flex for better cornering. FLUID RIDER MOTION - ERGONOMICS: Upgraded tank shrouds using bi-compound plastics channel air towards the radiators more efficiently, while a new fuel tank roll, makes for a tighter, more secure fitment, reducing the chance of frame scrubbing and dramatically improving durability. All this works alongside the specially-developed rider triangle, to provide unmatched knee contact and gripping surfaces - especially when standing on the pegs. UNMATCHED PERFORMANCE - PERFORMANCE: The 2025 KTM 350 SX-F engine is positioned for optimal mass centralization and an overall lightweight feel, benefiting handling and anti-squat behavior. The silencer offers incredible response in combination with the mapping switch and provides a slightly quieter exhaust note.HIT THE BIG STUFFUPDATED SUSPENSION SETTINGS: For 2025, the KTM SX and SX-F range has given the WP XACT AER fork and WP XACT rear shock an update. This means you'll be lining up at the starting gate with re-tuned settings, reduced weight, improved weight distribution, and an increase in overall response. UNFLAPPABLE FRONT END - WP XACT FORK: 48mm air type WP XACT front fork with a split damping function provides all the confidence you need to attack the track. Hydrostops in the fork legs improves bottoming-out resistance and account for less rebound when attacking big jumps, bumps, and thumps. Redesigned fork protection rings also increase protection against dirt, making them as reliable as they are awesome. WP XACT SHOCK: Keeping things in check at the rear, the WP XACT rear shock has also undergone some changes for 2025 using settings directly from the KTM Factory Racing Teams The improved frame and shock geometry mean more ground clearance at the linkage, making it less susceptible to bottoming out. While we're on the topic, smaller diameter linkage bolts save weight, while new linkage seals refine rear shock response and advanced damping characteristics. RACING ON RAILS - STABILITY: An upgraded rear brake pedal finds its way onto the 2025 KTM Motocross range, adding additional stiffness, bending resistance and braking feel to the overall package. At the other end, a forged steering head connection and CNC-milled triple clamps, make for the perfect alignment of the fork tubes. This precise geometry of the fork clamps ensures highly responsive and smooth fork action – not to mention unwavering stability when charging across ruts and onto the podium. HARNESSING GRAVITY - MASS CENTRALIZATION: Ready to rip your arms out of the sockets? Together with the benefits of mass centralization and overall reduced weight, the anti-squat behavior of the chassis is significantly improved by changing the backbone of the steel frame concept. In layman's terms, the 2025 KTM 350 SX-F gets its power down perfectly when tearing out of corners. TIRES: Getting power hooked into the dirt is a tough job. However, hours of research and testing have led the 2025 KTM Motocross range to the Dunlop GEOMAX MX34. Providing unmatched stability and control at the highest level, these rubber hoops feature a new carcass and rubber compound that improves damping and absorption, maintaining performance up to 30% longer. New Progressive Cornering Block Technology also improves grip in the berms, while a new rear pattern with 11% taller and 44% wider center block for increased traction and control everywhere else. Lastly, this unique block arrangement works to dispel mud buildup, ensuring traction in even the muddiest of track conditions.MAINTAINING MOMENTUMCONNECTIVITY UNIT OFFROAD: Available as a PowerPart on the KTM SX-F range, the Connectivity Unit Offroad - or CUO for short - offers a wide range of functionalities and adjustability options via the KTMconnect app. The CUO gives you a new insight into your riding, allows you to alter your engine behavior, and even provides you with optimized suspension settings based on individual preferences and riding conditions. Welcome to the next level moto. NOTHING TO HOLD YOU BACK - GROUND CLEARANCE: No one enjoys a bad hook-up. Good thing, then that the shock absorber geometry on the 2025 KTM 350 SX-F improves ground clearance of the linkage, with the topology-optimized die-cast footpegs being less susceptible to hooking on deep ruts, and take-offs when scrubbing. PRECISE, LAP AFTER LAP - CONSISTENCY: A new chain guide and chain guard result in improved durability and minimize the chances of hooking on external objects - especially in extremely muddy conditions while reducing dirt build-up around the swingarm and rear sprocket. UNOBTRUSIVE IMPACT - ENERGY ABSORPTION: Besides the expertly crafted, hydro-formed, laser-cut, and robot-welded frame being engineered to provide exceptional rider feedback and straight-line stability, it consists of specifically calculated parameters of longitudinal and torsional flex. This means the frame acts as a "shock absorber" of sorts, making for a less harsh ride, resulting in less rider fatigue over many hard laps.START STRONGUNMATCHED PERFORMANCE - MORE USABLE POWER: Perfectly filling the gap with the KTM 250 SX-F and the powerhouse KTM 450 SX-F, the lightweight KTM 350 SX-F powerplant weighs in at only 60.6 lb (27.5 kg). This makes it the ultimate weapon when weighing up power to weight options. DROP THE CLUTCH - LAUNCH CONTROL & QUICKSHIFTER: Launch control, ENGAGED! Designed for the holeshot, the 2025 KTM SX-F range comes standard with launch control and Quickshifter function, allowing for fast upshifts without using the clutch. Launch control is easily engaged by pressing the traction control and Quickshifter buttons simultaneously and works by limiting the amount of power to the rear wheel, improving traction, and preventing loss of control under hard acceleration. Meanwhile, the Quickshifter function means you can bang through from 2nd to 5th gear with your focus solely on the first corner. TOTAL TRACTION - SELECTABLE MAPS + TC: The map select switch on the 2025 KTM SX models features a simpler design, allowing for easier functionality in switching between 2 engine maps. Map 1 provides a more linear power curve. while map 2 punches all-out with aggressive throttle and explosive power. Luckily, traction control is easy toggled to an on or off position from the same switch, ensuring maximum traction and a distinct advantage in wet or muddy conditions. 

At the sharp end of the cross-country performance stakes, you'll find the 2025 KTM 250 XC. Not only does it boast one of the most potent powerplants around, it now gets upgraded suspension, a reworked chassis, and a new airbox for improved airflow. In simple terms, the 2025 KTM 250 XC is ready to extend its legendary status in the cross-country paddock.Features may include:BEFORE THE FLAGCLICK INTO ACTIONEasy Suspension AdjustmentThe 2025 KTM XC and XC-F range took their already awesome suspension package and turned it up to 11. The WP XACT Closed Cartridge spring forks and WP XACT rear shock has been updated, with reworked settings and alterations to improve weight distribution and increase overall response. As always, the suspension boasts an easy tool-free setup at both ends, ensuring you chase down the podium in total control. On the rear, a hand-adjustable dual compression control allows riders to adjust high- and low-speed settings in a matter of seconds. The forks on the front end are also easily adjusted thanks to hand-adjustable clickers on the bottom of the fork shoe and top cap.BREATHE EASYAirboxNow a more robust one-piece construction, the airbox on the 2025 KTM XC range features a redesigned air inlet sleeve and snorkel, which prevents deformation and improves airflow. But don't fret, toolless filter access is retained, with an intuitive filter mounting system and protection against dirt intrusion.START STRONGUNMATCHED PERFORMANCEMore Usable PowerThe KTM 250 XC has always represented the very best of unsurpassed power and lightweight construction. The simplicity and low maintenance cost of the 2-Stroke motor have made it a favorite amongst hard-core cross country racers for generations. For 2025, The KTM 250 XC enters the pits with the same legendary performance and low engine weight - only 52.6 lb - and a mission to maintain its benchmark as the one to beat.NO CARBS. MORE MUSCLEFuel InjectionWith Electronic Fuel Injection setting the standard, there's no more jetting setup pre-race, and thanks to the Keihin EFI, the ECU coming from Vitesco and reed valve case design, you can be guaranteed of laying down optimal power at any altitude, all of the time.TOTAL TRACTIONSelectable Maps + TCThe 2025 KTM 250 XC features a map select switch as standard, allowing the racer to switch between 2 perceptible engine maps. Map 1 provides a linear, predictable power delivery, while Map 2 gives it the full beans with crisp, explosive power output.CALM UNDER FIRECORNER ON RAILSAbsolute ControlNo matter how gnarly the trail is, you'll stay in control thanks to a rider-focussed frame design that has not only been engineered for longitudinal rigidity, but also positions rotating mass as close as possible to the center of gravity. Thick frame walls also improve reliability, flex characteristics and offer unmatched rider feel. The shock mounting also provides the perfect amount of anti-squat for better traction out of corners, while the footpeg mounting position reduces the risk of hooking up on roots or rocks. Additionally, forged brackets on the lower frame rails allow for easy installation of the skid plate.ErgonomicsThe 2025 KTM XC and XC-F range feature upgraded tank shrouds with bi-compound plastics, which work alongside the specially-developed rider triangle, to providing unmatched knee contact and gripping surfaces - especially when standing on the pegs. While the plastics work to expel mud buildup in wet, muddy conditions, the flat seat profile and high-grip orange seat cover providing exceptional rider movement and control.

At the sharp end of the cross-country performance stakes, you'll find the 2025 KTM 250 XC. Not only does it boast one of the most potent powerplants around, it now gets upgraded suspension, a reworked chassis, and a new airbox for improved airflow. In simple terms, the 2025 KTM 250 XC is ready to extend its legendary status in the cross-country paddock.Features may include:BEFORE THE FLAGCLICK INTO ACTIONEasy Suspension AdjustmentThe 2025 KTM XC and XC-F range took their already awesome suspension package and turned it up to 11. The WP XACT Closed Cartridge spring forks and WP XACT rear shock has been updated, with reworked settings and alterations to improve weight distribution and increase overall response. As always, the suspension boasts an easy tool-free setup at both ends, ensuring you chase down the podium in total control. On the rear, a hand-adjustable dual compression control allows riders to adjust high- and low-speed settings in a matter of seconds. The forks on the front end are also easily adjusted thanks to hand-adjustable clickers on the bottom of the fork shoe and top cap.BREATHE EASYAirboxNow a more robust one-piece construction, the airbox on the 2025 KTM XC range features a redesigned air inlet sleeve and snorkel, which prevents deformation and improves airflow. But don't fret, toolless filter access is retained, with an intuitive filter mounting system and protection against dirt intrusion.START STRONGUNMATCHED PERFORMANCEMore Usable PowerThe KTM 250 XC has always represented the very best of unsurpassed power and lightweight construction. The simplicity and low maintenance cost of the 2-Stroke motor have made it a favorite amongst hard-core cross country racers for generations. For 2025, The KTM 250 XC enters the pits with the same legendary performance and low engine weight - only 52.6 lb - and a mission to maintain its benchmark as the one to beat.NO CARBS. MORE MUSCLEFuel InjectionWith Electronic Fuel Injection setting the standard, there's no more jetting setup pre-race, and thanks to the Keihin EFI, the ECU coming from Vitesco and reed valve case design, you can be guaranteed of laying down optimal power at any altitude, all of the time.TOTAL TRACTIONSelectable Maps + TCThe 2025 KTM 250 XC features a map select switch as standard, allowing the racer to switch between 2 perceptible engine maps. Map 1 provides a linear, predictable power delivery, while Map 2 gives it the full beans with crisp, explosive power output.CALM UNDER FIRECORNER ON RAILSAbsolute ControlNo matter how gnarly the trail is, you'll stay in control thanks to a rider-focussed frame design that has not only been engineered for longitudinal rigidity, but also positions rotating mass as close as possible to the center of gravity. Thick frame walls also improve reliability, flex characteristics and offer unmatched rider feel. The shock mounting also provides the perfect amount of anti-squat for better traction out of corners, while the footpeg mounting position reduces the risk of hooking up on roots or rocks. Additionally, forged brackets on the lower frame rails allow for easy installation of the skid plate.ErgonomicsThe 2025 KTM XC and XC-F range feature upgraded tank shrouds with bi-compound plastics, which work alongside the specially-developed rider triangle, to providing unmatched knee contact and gripping surfaces - especially when standing on the pegs. While the plastics work to expel mud buildup in wet, muddy conditions, the flat seat profile and high-grip orange seat cover providing exceptional rider movement and control.

At the sharp end of the cross-country performance stakes, you'll find the 2025 KTM 250 XC. Not only does it boast one of the most potent powerplants around, it now gets upgraded suspension, a reworked chassis, and a new airbox for improved airflow. In simple terms, the 2025 KTM 250 XC is ready to extend its legendary status in the cross-country paddock.Features may include:BEFORE THE FLAGCLICK INTO ACTIONEasy Suspension AdjustmentThe 2025 KTM XC and XC-F range took their already awesome suspension package and turned it up to 11. The WP XACT Closed Cartridge spring forks and WP XACT rear shock has been updated, with reworked settings and alterations to improve weight distribution and increase overall response. As always, the suspension boasts an easy tool-free setup at both ends, ensuring you chase down the podium in total control. On the rear, a hand-adjustable dual compression control allows riders to adjust high- and low-speed settings in a matter of seconds. The forks on the front end are also easily adjusted thanks to hand-adjustable clickers on the bottom of the fork shoe and top cap.BREATHE EASYAirboxNow a more robust one-piece construction, the airbox on the 2025 KTM XC range features a redesigned air inlet sleeve and snorkel, which prevents deformation and improves airflow. But don't fret, toolless filter access is retained, with an intuitive filter mounting system and protection against dirt intrusion.START STRONGUNMATCHED PERFORMANCEMore Usable PowerThe KTM 250 XC has always represented the very best of unsurpassed power and lightweight construction. The simplicity and low maintenance cost of the 2-Stroke motor have made it a favorite amongst hard-core cross country racers for generations. For 2025, The KTM 250 XC enters the pits with the same legendary performance and low engine weight - only 52.6 lb - and a mission to maintain its benchmark as the one to beat.NO CARBS. MORE MUSCLEFuel InjectionWith Electronic Fuel Injection setting the standard, there's no more jetting setup pre-race, and thanks to the Keihin EFI, the ECU coming from Vitesco and reed valve case design, you can be guaranteed of laying down optimal power at any altitude, all of the time.TOTAL TRACTIONSelectable Maps + TCThe 2025 KTM 250 XC features a map select switch as standard, allowing the racer to switch between 2 perceptible engine maps. Map 1 provides a linear, predictable power delivery, while Map 2 gives it the full beans with crisp, explosive power output.CALM UNDER FIRECORNER ON RAILSAbsolute ControlNo matter how gnarly the trail is, you'll stay in control thanks to a rider-focussed frame design that has not only been engineered for longitudinal rigidity, but also positions rotating mass as close as possible to the center of gravity. Thick frame walls also improve reliability, flex characteristics and offer unmatched rider feel. The shock mounting also provides the perfect amount of anti-squat for better traction out of corners, while the footpeg mounting position reduces the risk of hooking up on roots or rocks. Additionally, forged brackets on the lower frame rails allow for easy installation of the skid plate.ErgonomicsThe 2025 KTM XC and XC-F range feature upgraded tank shrouds with bi-compound plastics, which work alongside the specially-developed rider triangle, to providing unmatched knee contact and gripping surfaces - especially when standing on the pegs. While the plastics work to expel mud buildup in wet, muddy conditions, the flat seat profile and high-grip orange seat cover providing exceptional rider movement and control.

At the sharp end of the cross-country performance stakes, you'll find the 2025 KTM 250 XC. Not only does it boast one of the most potent powerplants around, it now gets upgraded suspension, a reworked chassis, and a new airbox for improved airflow. In simple terms, the 2025 KTM 250 XC is ready to extend its legendary status in the cross-country paddock.Features may include:BEFORE THE FLAGCLICK INTO ACTIONEasy Suspension AdjustmentThe 2025 KTM XC and XC-F range took their already awesome suspension package and turned it up to 11. The WP XACT Closed Cartridge spring forks and WP XACT rear shock has been updated, with reworked settings and alterations to improve weight distribution and increase overall response. As always, the suspension boasts an easy tool-free setup at both ends, ensuring you chase down the podium in total control. On the rear, a hand-adjustable dual compression control allows riders to adjust high- and low-speed settings in a matter of seconds. The forks on the front end are also easily adjusted thanks to hand-adjustable clickers on the bottom of the fork shoe and top cap.BREATHE EASYAirboxNow a more robust one-piece construction, the airbox on the 2025 KTM XC range features a redesigned air inlet sleeve and snorkel, which prevents deformation and improves airflow. But don't fret, toolless filter access is retained, with an intuitive filter mounting system and protection against dirt intrusion.START STRONGUNMATCHED PERFORMANCEMore Usable PowerThe KTM 250 XC has always represented the very best of unsurpassed power and lightweight construction. The simplicity and low maintenance cost of the 2-Stroke motor have made it a favorite amongst hard-core cross country racers for generations. For 2025, The KTM 250 XC enters the pits with the same legendary performance and low engine weight - only 52.6 lb - and a mission to maintain its benchmark as the one to beat.NO CARBS. MORE MUSCLEFuel InjectionWith Electronic Fuel Injection setting the standard, there's no more jetting setup pre-race, and thanks to the Keihin EFI, the ECU coming from Vitesco and reed valve case design, you can be guaranteed of laying down optimal power at any altitude, all of the time.TOTAL TRACTIONSelectable Maps + TCThe 2025 KTM 250 XC features a map select switch as standard, allowing the racer to switch between 2 perceptible engine maps. Map 1 provides a linear, predictable power delivery, while Map 2 gives it the full beans with crisp, explosive power output.CALM UNDER FIRECORNER ON RAILSAbsolute ControlNo matter how gnarly the trail is, you'll stay in control thanks to a rider-focussed frame design that has not only been engineered for longitudinal rigidity, but also positions rotating mass as close as possible to the center of gravity. Thick frame walls also improve reliability, flex characteristics and offer unmatched rider feel. The shock mounting also provides the perfect amount of anti-squat for better traction out of corners, while the footpeg mounting position reduces the risk of hooking up on roots or rocks. Additionally, forged brackets on the lower frame rails allow for easy installation of the skid plate.ErgonomicsThe 2025 KTM XC and XC-F range feature upgraded tank shrouds with bi-compound plastics, which work alongside the specially-developed rider triangle, to providing unmatched knee contact and gripping surfaces - especially when standing on the pegs. While the plastics work to expel mud buildup in wet, muddy conditions, the flat seat profile and high-grip orange seat cover providing exceptional rider movement and control.

LAST BLUE ONE AVAILABLE!!Evolution and adaption are critical when it comes to maintaining one's status as the top dog. The KTM 1290 SUPER DUKE R EVO is a BEAST - evolved. Boasting intuitive Semi-Active Suspension Technology (SAT), this BEAST not only adapts to the road surface but also to the rider's inputs - making it a cold, calculated hunter. A frightening prospect for any would-be challenger.ENGINE & EXHAUSTEngine: If it ain't broken, don't fix it. But by all means, make it meaner! Boasting 180 hp and 140 Nm, the 1301 cc LC8, V-Twin has undergone a subtle yet impactful development. Optimized to be lighter but retaining its torquey character, this powerhouse is the benchmark of V-twin evolution. And with engine and linkage mounts that add to the overall structure of the entire package - it quite literally is the part that holds THE BEAST together.Engine Case: Thinner engine casings and revised water and oil cooler mounts have resulted in a 0.8 kg weight saving, compared to the previous generation. Oil delivery has also been improved by way of a lightweight aluminum oil line, eliminating the need for a double wall system. Additionally, the engine carrier bracket and linkage mount have been integrated into the engine case, allowing for a stiffer connection. This has also resulted in a 5 mm higher swingarm pivot for improved stability and anti-squat.Injectors: Top feeder injectors and 56 mm throttle bodies provide an improved air to fuel mixture at high rpms. This results in more torque and better fuel economy throughout the rev range.Gearbox: You don't always need big changes to make big differences. In fact, when it comes to the PANKL transmission, we've made a few small tweaks which have resulted in quicker shift times, shorter shift action and lighter lever modulation. Smoother shift action also comes courtesy of an improved spline shaft and bronzed copper coating on the shift forks. Why do all this? Quite simply - quicker shift times equal faster acceleration.Twin Spark Ignition: When it comes to burning fuel efficiently, two sparks are better than one. The twin spark ignition system makes use of more powerful ignition coils and two spark plugs in each cylinder head. This makes for an optimized firing sequence, resulting in more power, better control, lower fuel consumption and lower emissions.Air Intake: To perform like a BEAST, the KTM 1290 SUPER DUKE R EVO needs to breath like a BEAST. Thanks to a ram air intake positioned in the headlight mask, this rip snorting arrangement maximizes flow by forcing air into the combustion chambers. This in turn reduces the chance of low air pressure and increases the fuel burn rate. The addition of a newly designed and easy-to-access air filter box makes for easy servicing too.Titanium Inlet Valves: State-of-the-art, machined titanium inlet valves with chromium nitride PVD coating - how impressive does that sound? These feature a flat design, and weigh 19 grams less than steel inlet valves. When combined with the meticulously engineered cylinder heads and combustion chambers on the KTM 1290 SUPER DUKE R EVO, offering a compression ratio of 13.6:1, there is ultimately one outcome, pure power.Cylinder Heads: Thanks to the resonator chambers on the cylinder heads, which have been engineered to increase the torque output in the lower to mid-range rpms, the KTM 1290 SUPER DUKE R EVO pulls like a train, while keeping fuel consuption and CO² emissions in check.PASC Clutch: While the pressure lubricated PASC slipper clutch allows for feather-light clutch modulation while accelerating, it's how it handles slowing down that's the really impressive bit. When the engine experiences extreme back-torque during aggressive downshifting from speed, the clutch opens to prevent the rear wheel locking, giving the rider full control and perfect entry speed while hunting apexes.Ride-By-Wire: A new quick turn throttle twist grip has been added to the KTM 1290 SUPER DUKE R EVO's arsenal. With the twist-action reduced by 7 degrees, this R&D-developed solution not only offers faster and more responsive throttle input but also reduces the rider wrist angle and elbow drop at full-throttle. This is paired with buttery-smooth ride by wire which electronically translates the throttle commands of the rider into the best throttle valve positions for the current riding situation. Choking, jolting and involuntary wheelies are a thing of the past. Voluntary ones, however, could easily be a thing of your futureCrankcase: In the battle of physics and blasting holes in the space-time continuum, lighter is faster. But when you're working with a pure naked BEAST, finding the places to trim fat is often a challenge. Weight has been shaved off the crankcases, by making them marginally thinner, which, when combined with a new water pump and lighter clutch cover, provides a substantial overall weight saving.Pistons: Formula1-inspired forged piston technology means we can push the limits of load capacity despite the extremely short and lightweight design. This results in minimized reciprocating weight and maximized responsiveness. The piston skirts also feature a state-of-the-art, hard anodized finish which minimizes friction, adding to the engine's free-revving nature. What's more, the hard-wearing durability of these parts add many years to an already impressive engine life.Exhaust: This is not a case of "bark being worse than bite" - this BEAST roars! Up to 60 mm of drainpipe-like dimensions at the headers optimize gas flow, while 2 catalytic converters control emissions, without compromising the V-twin engine note or horsepower.Airfilter: Gone are the days of complicated air-filter maintainence. Thanks top an easy-to-access air filter box, swapping out your air filter for a fresh set of lungs is as easy as making sportsbike riders cry. CHASSISFrame: The frame, which uses the engine as a means to increase torsional rigidity, has resulted in the KTM 1290 SUPER DUKE R EVO being 3 times stiffer than its predecessor. This allows for an effortless, confidence-inspiring riding position which translate into an ultimately faster ride. This is achieved by maximizing the feedback from the chassis and the front tire. The frame also makes use of thicker diameter tubes with thinner walls, which is the single biggest weight saving measure on the bike - saving 2 kg compared to the previous generation model.Subframe: Multi-dexterity is the name of the game when it comes to this BEAST's tail. A lightweight composite subframe combines a number of functions to save weight and increase functionality. The passenger seat, license plate holder and tail lights bolt directly onto the subframe structure with no additional brackets or attachments needed.Swingarm: To increase feel and traction, the pivot point of the single-sided swingarm is positioned 5mm higher relative to the front sprocket for more control when putting the power down. Combined with the repositioning of the engine in the frame, a steeper swingarm angle has been achieved, increasing anti-squat compared to the previous generation.Semi-Active Suspension: With its ability to adapt to the road conditions and rider inputs, the KTM 1290 SUPER DUKE R EVO's new WP Semi-Active Technology (SAT) transforms this BEAST from a stone-cold hunter to a calculated apex predator. As the most advanced suspension system on the market, the WP SAT features newly developed electronically controlled magnetic valves for variable damping, providing a wide range of adjustability from maximum street comfort to extreme track-ready stiffness.Front Fork: 48mm WP APEX forks feature Electronically controlled damping that feels more conventional and less intrusive. This was achieved by using Pulse Width Modulation stroke sensors which offer finer and more responsive stroke signals and a faster responding SAT valve. The end result? Seamless suspension adjustment with the rider left to simply get on with the job of riding.Triple Clamp: Lightweight, forged aluminum triple clamps with an offset of 32 mm have been matched to an aluminum steering column for added weight savings. Essentially, this is the bit that connects the nut holding the handlebars to the front end.Shock Absorber: Combined with SUSPENSION PRO. the shock absorber features an all-new automatic preload adjuster which uses a stroke sensor that enables the SAT system to recognize how much load there is on the motorcycle, effecting an automatic preload of the spring for perfect balance geometry and sag. These can be adjusted via three modes - LOW, STANDARD, HIGH. Alternatively the rider can adjust between 0% and 100% in increments of 10%. All settings for the suspension can be performed via the dashboard and the modes/settings are indicated on the TFT screen.Suspension Pro: SUSPENSION PRO allows riders to select three additional suspension settings, namely TRACK, AUTO, and ADVANCED, whereby riders can achieve ultimate TRACK settings, ask the machine to automatically adjust the suspension based on their current riding situation, or deep-dive into the ADVANCED settings for suspension fine-tuning.Linkage: Through the power of leverage, the linkage at the rear helps to smooth out rough roads, while still ensuring that full-attack track action remains uncompromised. The progressive damping character also ensures optimized damping and bottoming out resistance.Wheels: These wheels didn't just happen by the grace of a designer's pen - they are the product of a sophisticated CAD system, which determines the best shape in terms of strength and lightness. What that means is that these wheels are engineered down to the finest detail, they are lighter than before and look great.Tires: BRIDGESTONE S22 tires - 120/70/17 in the front and 200/55/17 in the rear - are specifically developed for the KTM 1290 SUPER DUKE R EVO. Featuring a fine-particle silica compound, they offer much-improved grip in wet weather conditions, making for exceptional characteristics on the road but also phenomenal handling on the track.Brakes: Reigning this BEAST comes courtesy of 4-piston BREMBO Stylema monobloc calipers clamping onto 320 mm floating discs up front, and a twin piston floating caliper biting a 240 mm disc at the rear. ERGONOMICS & COMFORTHandlebar: Finding the optimal seating position is made easy with an adjustable 760 mm wide handlebar. Riders can tailor their preferred reach with 4 positions over 22 mm, front to back, making it easy to attack corners and crucial for hanging on down the straights.Menu Switch: The KTM 1290 SUPER DUKE R EVO boasts an intuitive TFT dashboard with multi-functionality. To access this, robust, tactile motorcycle switchgear has been developed - which incidentally push all the right buttons. Riders can adjust the wheel slip easily via paddle buttons on the switchgear, while in TRACK MODE, or can set two programmable switches for fast access to favored features or setting of their choosing.Hand Levers: Hydraulic brake and clutch levers make for easy one-finger operation, while full reach adjustability ensures they are within easy grasp of even the most reach-challenged riders.Seats: There's no doubting THE BEAST's performance credentials. But that doesn't mean riders have to sacrifice long-distance comfort either. While the KTM 1290 SUPER DUKE R EVO is at home on the track, it's a naked street bike first. This means passenger comfort has been thoroughly thought-out and has been designed to allow for real-world, 2-up riding.Footpegs: Big lean angles come as standard, thanks to smart positioning of the foot pegs, which also allow for comfort on the road. However, further refinement is also possible with two positions, which lift the pegs higher and further backwards for a more aggressive stance. And as can be expected, the gear shift pattern can be easily reversed to a 5 down, 1 up arrangement for full BEAST MODE track attacks. Shift and brake levers are fully adjustable too. SOFTWARE & ELECTRONICSLED Headlight: While the headlight mask doubles as an intake snorkel, it's the twin LED headlights that really shine. Sharp, menacing lines enhance THE BEAST's overall look, while providing ample illumination when it gets dark. Daytime running lights also ensure you will get noticed, which not only earns you kudos when it comes to street cred, but more importantly, makes you more visible to other road users.Rider Aids: Many traditionalists might frown at the sight of electronic rider aids, saying they interfere with the purity of the ride. However, when it comes to the KTM 1290 SUPER DUKE R EVO, all electronic features have received an update, providing more feedback from the engine, and less intrusiveness from the safety systems. To say it simply - smarter systems, more performance.Ride Modes: In a bid for ultimate control, the KTM 1290 SUPER DUKE R EVO features highend traction control, anti-wheelie functionality and ride modes.Rain modeRain mode" is the no-brainer setting for slippery conditions, resulting in maximum traction control, ultra-smooth throttle response and less power, keeping the front wheel on the tarmac when you really need it.Street modeJust like it sounds, "Street mode" is made for the daily grind on everyday roads. Full power, default throttle response and limited slip traction control keeps things controlled on the road. Sport modeDialled in for a more spirited ride, "Sport mode" tightens up the throttle control, winds down the traction control slightly and allows the front end to lift under hard acceleration. And of course - unleashes all the horse power.Track Mode: The optional "Track mode" allows riders to customize wheel slip levels and throttle response to suit their own individual tastes or track conditions. Traction control can be tweaked over 9 levels of slip while MSC is disabled completely. Anti-wheelie can also be disabled completely for those who like to hoist the front wheel across the start/finish line.Performance Mode: An optional "Performance mode" takes the basic concept of "Track mode" but adapts it for the street. Riders are still able to adjust throttle response, wheel slip and anti-wheelie functions, but retain typical street functions such as Cruise Control and KTM MY RIDE.MTC: Motorcycle traction control - or MTC for short - uses two different controllers to keep things in check. The most obvious of which is a wheel slip controller which regulates the amount of spin or break in traction at the rear wheel. A pitch angle controller identifies and regulates abrupt changes in front wheel lift. Each of these controllers work with individual strategies to ensure a seamless "behind-the-scenes" safety net is always in play. While the safety benefits are obvious, this also results in improved straight-line acceleration.MTC also works when lean angles get tested, reacting immediately if the rotational speed of the rear wheel is disproportionate to the riding situation. MTC reduces the engine output with an extremely smooth, barely noticeable intervention at the throttle valves, reducing slippage to optimum levels for the selected ride mode and lean angle. Depending on the selected riding mode, MTC allows different levels of traction slip at the rear wheel. And of course, MTC can be switched off completely for the full BEAST experience.MSR: Unlike MTC which works when the power gets rolled on, MSR works when the power is wound off. MSR (optional), or Motor Slip Regulation, works with the slipper clutch to balance the throttle, ensuring super-smooth deceleration in the harshest conditions without any unwanted rear wheel lockup. This is deactivated in "Track" and "Supermoto ABS" modes, to allow riders to back the bike into corners - as you would expect.Supermoto ABS: Three things happen when riders select "Supermoto ABS". First, all ABS functionality is disabled on the rear wheel, allowing the riders to lock up the brakes and slide into corners. Secondly, the ABS system does not interfere in the event of the rear wheel lifting off the tarmac, allowing for stoppies. And thirdly, cornering ABS is disabled, allowing riders full control when barreling into fast corners with maximum brake pressure. All in all, the deactivation of these functions in "Supermoto ABS" gives the rider more control in extreme track scenarios and allows advanced riders to brake much harder for maximum apex-hunting sessions.Cruise Control: Long motorway journeys are easily dispatched with the SUPER DUKE R EVO's cruise control system. Easily activated and controlled by a switch on the left hand side of the handlebar, riders can set cruise control in 3rd, 4th, 5th and 6th gear, between 40 km/h and 200 km/h. That's one way to save energy for the twisty bits.TPMS: As its name implies, the TPMS monitors tire pressure and warns riders of potential tire damage in the event of pressure loss on the TFT display. An added convenience when you want to spend more time on the road and less time checking air pressures.Atir: Auto-cancelling turn signals are a big improvement in terms of safety, as it is now impossible to forget that they are activated and flashing into infinitum. Indicators stop flashing after 10 seconds and in 150 meters.KTM Race On System: Forget about ignition keys and mechanically locked fuel caps, the KTM 1290 SUPER DUKE R EVO features KTM RACE ON! All you need is the transponder key in your pocket and you can unlock THE BEAST.KTM Myride: KTM MY RIDE puts you in control of your smartphone, without losing control of the bars. By using a mobile app on your smart device, KTM MY RIDE givies you turn-by-turn navigation, access your music library and allows you to make and receive phone calls on the fly - right from your dashboard. BODYWORK & GRAPHICSBodywork: There isn't much to say about the bodywork of the new KTM 1290 SUPER DUKE R EVO as there is so little of it to talk about. But that's exactly how we like it! Aggressive and menacing, the bodywork and panels had to achieve two objectives - tick all the ergonomic boxes and shave weight wherever possible. As such, every panel and plate has been calculated for optimum thickness and minimized where possible. The only thing that remained heavy was attitude.Sharp Rear End: Thanks to a lightweight composite subframe, the passenger seat, license plate holder and tail lights could be seamlessly incorporated into a neat rear end, which keeps a little sting in the tail.Air Intake: Almost mantis-like, the LED headlight doubles as a ram air intake, with air being channeled between the lights, keeping them cool, and directly into the air filter box, making for a more efficient burn. Besides looking great, the dual-functionality resulted in cleaner, more compact lines and less overall weight.Tank: Crafted from steel, the 16 liter fuel tank has been made to bulk up THE BEAST's haunches. Also, the new shape and angle have been designed to support the rider on street and on the track.Graphics: There's no mistaking that this is the meanest bike on the block. A high-quality application process has been used to ensure the signature 'R' graphics stay put and never fade, while contrasting colors, tones and textures set the muscled creases of the KTM 1290 SUPER DUKE R off perfectly. ENGINE SPECIFICATIONSTransmission: 6-speedCooling: Liquid cooledPower in KW: 132 kWStarter: Electric starterStroke: 71 mmBore: 108 mmClutch: PASC™ slipper clutch, hydraulically actuatedDisplacement: 1301 cm³EMS: Keihin EMS with RBW and cruise control, double ignitionDesign: 2-cylinder, 4-stroke, V 75°Lubrication: Forced oil lubrication with 3 oil pumps CHASSIS SPECIFICATIONSABS: Bosch 9.1MP 2.0 (with cornering ABS and SUPERMOTO ABS)Front brake disc diameter: 320 mmRear brake disc diameter: 240 mmChain: 525 X-RingFrame design: Chrome-moly tubular space frame, powder-coatedFront suspension: WP Semi-active Suspension USD Ø 48 mm (GEN.2)Rear suspension: WP Semi-active Rear Shock (GEN.2)Steering head angle: 64.8 ° NOTES:The illustrated vehicles may vary in selected details from the production models and some illustrations feature optional equipment available at additional cost. All information concerning the scope of supply, appearance, services, dimensions and weights is non-binding and specified with the proviso that errors, for instance in printing, setting and/or typing, may occur; such information is subject to change without notice. Please note that model specifications may vary from country to country. In the case of coated surfaces, there may be color differences due to the usual process fluctuations. The consumption values stated refer to the roadworthy series condition of the vehicles at the time of factory delivery.

Evolution and adaption are critical when it comes to maintaining one's status as the top dog. The KTM 1290 SUPER DUKE R EVO is a BEAST - evolved. Boasting intuitive Semi-Active Suspension Technology (SAT), this BEAST not only adapts to the road surface but also to the rider's inputs - making it a cold, calculated hunter. A frightening prospect for any would-be challenger.ENGINE & EXHAUSTEngine: If it ain't broken, don't fix it. But by all means, make it meaner! Boasting 180 hp and 140 Nm, the 1301 cc LC8, V-Twin has undergone a subtle yet impactful development. Optimized to be lighter but retaining its torquey character, this powerhouse is the benchmark of V-twin evolution. And with engine and linkage mounts that add to the overall structure of the entire package - it quite literally is the part that holds THE BEAST together.Engine Case: Thinner engine casings and revised water and oil cooler mounts have resulted in a 0.8 kg weight saving, compared to the previous generation. Oil delivery has also been improved by way of a lightweight aluminum oil line, eliminating the need for a double wall system. Additionally, the engine carrier bracket and linkage mount have been integrated into the engine case, allowing for a stiffer connection. This has also resulted in a 5 mm higher swingarm pivot for improved stability and anti-squat.Injectors: Top feeder injectors and 56 mm throttle bodies provide an improved air to fuel mixture at high rpms. This results in more torque and better fuel economy throughout the rev range.Gearbox: You don't always need big changes to make big differences. In fact, when it comes to the PANKL transmission, we've made a few small tweaks which have resulted in quicker shift times, shorter shift action and lighter lever modulation. Smoother shift action also comes courtesy of an improved spline shaft and bronzed copper coating on the shift forks. Why do all this? Quite simply - quicker shift times equal faster acceleration.Twin Spark Ignition: When it comes to burning fuel efficiently, two sparks are better than one. The twin spark ignition system makes use of more powerful ignition coils and two spark plugs in each cylinder head. This makes for an optimized firing sequence, resulting in more power, better control, lower fuel consumption and lower emissions.Air Intake: To perform like a BEAST, the KTM 1290 SUPER DUKE R EVO needs to breath like a BEAST. Thanks to a ram air intake positioned in the headlight mask, this rip snorting arrangement maximizes flow by forcing air into the combustion chambers. This in turn reduces the chance of low air pressure and increases the fuel burn rate. The addition of a newly designed and easy-to-access air filter box makes for easy servicing too.Titanium Inlet Valves: State-of-the-art, machined titanium inlet valves with chromium nitride PVD coating - how impressive does that sound? These feature a flat design, and weigh 19 grams less than steel inlet valves. When combined with the meticulously engineered cylinder heads and combustion chambers on the KTM 1290 SUPER DUKE R EVO, offering a compression ratio of 13.6:1, there is ultimately one outcome, pure power.Cylinder Heads: Thanks to the resonator chambers on the cylinder heads, which have been engineered to increase the torque output in the lower to mid-range rpms, the KTM 1290 SUPER DUKE R EVO pulls like a train, while keeping fuel consuption and CO² emissions in check.PASC Clutch: While the pressure lubricated PASC slipper clutch allows for feather-light clutch modulation while accelerating, it's how it handles slowing down that's the really impressive bit. When the engine experiences extreme back-torque during aggressive downshifting from speed, the clutch opens to prevent the rear wheel locking, giving the rider full control and perfect entry speed while hunting apexes.Ride-By-Wire: A new quick turn throttle twist grip has been added to the KTM 1290 SUPER DUKE R EVO's arsenal. With the twist-action reduced by 7 degrees, this R&D-developed solution not only offers faster and more responsive throttle input but also reduces the rider wrist angle and elbow drop at full-throttle. This is paired with buttery-smooth ride by wire which electronically translates the throttle commands of the rider into the best throttle valve positions for the current riding situation. Choking, jolting and involuntary wheelies are a thing of the past. Voluntary ones, however, could easily be a thing of your futureCrankcase: In the battle of physics and blasting holes in the space-time continuum, lighter is faster. But when you're working with a pure naked BEAST, finding the places to trim fat is often a challenge. Weight has been shaved off the crankcases, by making them marginally thinner, which, when combined with a new water pump and lighter clutch cover, provides a substantial overall weight saving.Pistons: Formula1-inspired forged piston technology means we can push the limits of load capacity despite the extremely short and lightweight design. This results in minimized reciprocating weight and maximized responsiveness. The piston skirts also feature a state-of-the-art, hard anodized finish which minimizes friction, adding to the engine's free-revving nature. What's more, the hard-wearing durability of these parts add many years to an already impressive engine life.Exhaust: This is not a case of "bark being worse than bite" - this BEAST roars! Up to 60 mm of drainpipe-like dimensions at the headers optimize gas flow, while 2 catalytic converters control emissions, without compromising the V-twin engine note or horsepower.Airfilter: Gone are the days of complicated air-filter maintainence. Thanks top an easy-to-access air filter box, swapping out your air filter for a fresh set of lungs is as easy as making sportsbike riders cry. CHASSISFrame: The frame, which uses the engine as a means to increase torsional rigidity, has resulted in the KTM 1290 SUPER DUKE R EVO being 3 times stiffer than its predecessor. This allows for an effortless, confidence-inspiring riding position which translate into an ultimately faster ride. This is achieved by maximizing the feedback from the chassis and the front tire. The frame also makes use of thicker diameter tubes with thinner walls, which is the single biggest weight saving measure on the bike - saving 2 kg compared to the previous generation model.Subframe: Multi-dexterity is the name of the game when it comes to this BEAST's tail. A lightweight composite subframe combines a number of functions to save weight and increase functionality. The passenger seat, license plate holder and tail lights bolt directly onto the subframe structure with no additional brackets or attachments needed.Swingarm: To increase feel and traction, the pivot point of the single-sided swingarm is positioned 5mm higher relative to the front sprocket for more control when putting the power down. Combined with the repositioning of the engine in the frame, a steeper swingarm angle has been achieved, increasing anti-squat compared to the previous generation.Semi-Active Suspension: With its ability to adapt to the road conditions and rider inputs, the KTM 1290 SUPER DUKE R EVO's new WP Semi-Active Technology (SAT) transforms this BEAST from a stone-cold hunter to a calculated apex predator. As the most advanced suspension system on the market, the WP SAT features newly developed electronically controlled magnetic valves for variable damping, providing a wide range of adjustability from maximum street comfort to extreme track-ready stiffness.Front Fork: 48mm WP APEX forks feature Electronically controlled damping that feels more conventional and less intrusive. This was achieved by using Pulse Width Modulation stroke sensors which offer finer and more responsive stroke signals and a faster responding SAT valve. The end result? Seamless suspension adjustment with the rider left to simply get on with the job of riding.Triple Clamp: Lightweight, forged aluminum triple clamps with an offset of 32 mm have been matched to an aluminum steering column for added weight savings. Essentially, this is the bit that connects the nut holding the handlebars to the front end.Shock Absorber: Combined with SUSPENSION PRO. the shock absorber features an all-new automatic preload adjuster which uses a stroke sensor that enables the SAT system to recognize how much load there is on the motorcycle, effecting an automatic preload of the spring for perfect balance geometry and sag. These can be adjusted via three modes - LOW, STANDARD, HIGH. Alternatively the rider can adjust between 0% and 100% in increments of 10%. All settings for the suspension can be performed via the dashboard and the modes/settings are indicated on the TFT screen.Suspension Pro: SUSPENSION PRO allows riders to select three additional suspension settings, namely TRACK, AUTO, and ADVANCED, whereby riders can achieve ultimate TRACK settings, ask the machine to automatically adjust the suspension based on their current riding situation, or deep-dive into the ADVANCED settings for suspension fine-tuning.Linkage: Through the power of leverage, the linkage at the rear helps to smooth out rough roads, while still ensuring that full-attack track action remains uncompromised. The progressive damping character also ensures optimized damping and bottoming out resistance.Wheels: These wheels didn't just happen by the grace of a designer's pen - they are the product of a sophisticated CAD system, which determines the best shape in terms of strength and lightness. What that means is that these wheels are engineered down to the finest detail, they are lighter than before and look great.Tires: BRIDGESTONE S22 tires - 120/70/17 in the front and 200/55/17 in the rear - are specifically developed for the KTM 1290 SUPER DUKE R EVO. Featuring a fine-particle silica compound, they offer much-improved grip in wet weather conditions, making for exceptional characteristics on the road but also phenomenal handling on the track.Brakes: Reigning this BEAST comes courtesy of 4-piston BREMBO Stylema monobloc calipers clamping onto 320 mm floating discs up front, and a twin piston floating caliper biting a 240 mm disc at the rear. ERGONOMICS & COMFORTHandlebar: Finding the optimal seating position is made easy with an adjustable 760 mm wide handlebar. Riders can tailor their preferred reach with 4 positions over 22 mm, front to back, making it easy to attack corners and crucial for hanging on down the straights.Menu Switch: The KTM 1290 SUPER DUKE R EVO boasts an intuitive TFT dashboard with multi-functionality. To access this, robust, tactile motorcycle switchgear has been developed - which incidentally push all the right buttons. Riders can adjust the wheel slip easily via paddle buttons on the switchgear, while in TRACK MODE, or can set two programmable switches for fast access to favored features or setting of their choosing.Hand Levers: Hydraulic brake and clutch levers make for easy one-finger operation, while full reach adjustability ensures they are within easy grasp of even the most reach-challenged riders.Seats: There's no doubting THE BEAST's performance credentials. But that doesn't mean riders have to sacrifice long-distance comfort either. While the KTM 1290 SUPER DUKE R EVO is at home on the track, it's a naked street bike first. This means passenger comfort has been thoroughly thought-out and has been designed to allow for real-world, 2-up riding.Footpegs: Big lean angles come as standard, thanks to smart positioning of the foot pegs, which also allow for comfort on the road. However, further refinement is also possible with two positions, which lift the pegs higher and further backwards for a more aggressive stance. And as can be expected, the gear shift pattern can be easily reversed to a 5 down, 1 up arrangement for full BEAST MODE track attacks. Shift and brake levers are fully adjustable too. SOFTWARE & ELECTRONICSLED Headlight: While the headlight mask doubles as an intake snorkel, it's the twin LED headlights that really shine. Sharp, menacing lines enhance THE BEAST's overall look, while providing ample illumination when it gets dark. Daytime running lights also ensure you will get noticed, which not only earns you kudos when it comes to street cred, but more importantly, makes you more visible to other road users.Rider Aids: Many traditionalists might frown at the sight of electronic rider aids, saying they interfere with the purity of the ride. However, when it comes to the KTM 1290 SUPER DUKE R EVO, all electronic features have received an update, providing more feedback from the engine, and less intrusiveness from the safety systems. To say it simply - smarter systems, more performance.Ride Modes: In a bid for ultimate control, the KTM 1290 SUPER DUKE R EVO features highend traction control, anti-wheelie functionality and ride modes.Rain modeRain mode" is the no-brainer setting for slippery conditions, resulting in maximum traction control, ultra-smooth throttle response and less power, keeping the front wheel on the tarmac when you really need it.Street modeJust like it sounds, "Street mode" is made for the daily grind on everyday roads. Full power, default throttle response and limited slip traction control keeps things controlled on the road. Sport modeDialled in for a more spirited ride, "Sport mode" tightens up the throttle control, winds down the traction control slightly and allows the front end to lift under hard acceleration. And of course - unleashes all the horse power.Track Mode: The optional "Track mode" allows riders to customize wheel slip levels and throttle response to suit their own individual tastes or track conditions. Traction control can be tweaked over 9 levels of slip while MSC is disabled completely. Anti-wheelie can also be disabled completely for those who like to hoist the front wheel across the start/finish line.Performance Mode: An optional "Performance mode" takes the basic concept of "Track mode" but adapts it for the street. Riders are still able to adjust throttle response, wheel slip and anti-wheelie functions, but retain typical street functions such as Cruise Control and KTM MY RIDE.MTC: Motorcycle traction control - or MTC for short - uses two different controllers to keep things in check. The most obvious of which is a wheel slip controller which regulates the amount of spin or break in traction at the rear wheel. A pitch angle controller identifies and regulates abrupt changes in front wheel lift. Each of these controllers work with individual strategies to ensure a seamless "behind-the-scenes" safety net is always in play. While the safety benefits are obvious, this also results in improved straight-line acceleration.MTC also works when lean angles get tested, reacting immediately if the rotational speed of the rear wheel is disproportionate to the riding situation. MTC reduces the engine output with an extremely smooth, barely noticeable intervention at the throttle valves, reducing slippage to optimum levels for the selected ride mode and lean angle. Depending on the selected riding mode, MTC allows different levels of traction slip at the rear wheel. And of course, MTC can be switched off completely for the full BEAST experience.MSR: Unlike MTC which works when the power gets rolled on, MSR works when the power is wound off. MSR (optional), or Motor Slip Regulation, works with the slipper clutch to balance the throttle, ensuring super-smooth deceleration in the harshest conditions without any unwanted rear wheel lockup. This is deactivated in "Track" and "Supermoto ABS" modes, to allow riders to back the bike into corners - as you would expect.Supermoto ABS: Three things happen when riders select "Supermoto ABS". First, all ABS functionality is disabled on the rear wheel, allowing the riders to lock up the brakes and slide into corners. Secondly, the ABS system does not interfere in the event of the rear wheel lifting off the tarmac, allowing for stoppies. And thirdly, cornering ABS is disabled, allowing riders full control when barreling into fast corners with maximum brake pressure. All in all, the deactivation of these functions in "Supermoto ABS" gives the rider more control in extreme track scenarios and allows advanced riders to brake much harder for maximum apex-hunting sessions.Cruise Control: Long motorway journeys are easily dispatched with the SUPER DUKE R EVO's cruise control system. Easily activated and controlled by a switch on the left hand side of the handlebar, riders can set cruise control in 3rd, 4th, 5th and 6th gear, between 40 km/h and 200 km/h. That's one way to save energy for the twisty bits.TPMS: As its name implies, the TPMS monitors tire pressure and warns riders of potential tire damage in the event of pressure loss on the TFT display. An added convenience when you want to spend more time on the road and less time checking air pressures.Atir: Auto-cancelling turn signals are a big improvement in terms of safety, as it is now impossible to forget that they are activated and flashing into infinitum. Indicators stop flashing after 10 seconds and in 150 meters.KTM Race On System: Forget about ignition keys and mechanically locked fuel caps, the KTM 1290 SUPER DUKE R EVO features KTM RACE ON! All you need is the transponder key in your pocket and you can unlock THE BEAST.KTM Myride: KTM MY RIDE puts you in control of your smartphone, without losing control of the bars. By using a mobile app on your smart device, KTM MY RIDE givies you turn-by-turn navigation, access your music library and allows you to make and receive phone calls on the fly - right from your dashboard. BODYWORK & GRAPHICSBodywork: There isn't much to say about the bodywork of the new KTM 1290 SUPER DUKE R EVO as there is so little of it to talk about. But that's exactly how we like it! Aggressive and menacing, the bodywork and panels had to achieve two objectives - tick all the ergonomic boxes and shave weight wherever possible. As such, every panel and plate has been calculated for optimum thickness and minimized where possible. The only thing that remained heavy was attitude.Sharp Rear End: Thanks to a lightweight composite subframe, the passenger seat, license plate holder and tail lights could be seamlessly incorporated into a neat rear end, which keeps a little sting in the tail.Air Intake: Almost mantis-like, the LED headlight doubles as a ram air intake, with air being channeled between the lights, keeping them cool, and directly into the air filter box, making for a more efficient burn. Besides looking great, the dual-functionality resulted in cleaner, more compact lines and less overall weight.Tank: Crafted from steel, the 16 liter fuel tank has been made to bulk up THE BEAST's haunches. Also, the new shape and angle have been designed to support the rider on street and on the track.Graphics: There's no mistaking that this is the meanest bike on the block. A high-quality application process has been used to ensure the signature 'R' graphics stay put and never fade, while contrasting colors, tones and textures set the muscled creases of the KTM 1290 SUPER DUKE R off perfectly. ENGINE SPECIFICATIONSTransmission: 6-speedCooling: Liquid cooledPower in KW: 132 kWStarter: Electric starterStroke: 71 mmBore: 108 mmClutch: PASC™ slipper clutch, hydraulically actuatedDisplacement: 1301 cm³EMS: Keihin EMS with RBW and cruise control, double ignitionDesign: 2-cylinder, 4-stroke, V 75°Lubrication: Forced oil lubrication with 3 oil pumps CHASSIS SPECIFICATIONSABS: Bosch 9.1MP 2.0 (with cornering ABS and SUPERMOTO ABS)Front brake disc diameter: 320 mmRear brake disc diameter: 240 mmChain: 525 X-RingFrame design: Chrome-moly tubular space frame, powder-coatedFront suspension: WP Semi-active Suspension USD Ø 48 mm (GEN.2)Rear suspension: WP Semi-active Rear Shock (GEN.2)Steering head angle: 64.8 ° NOTES:The illustrated vehicles may vary in selected details from the production models and some illustrations feature optional equipment available at additional cost. All information concerning the scope of supply, appearance, services, dimensions and weights is non-binding and specified with the proviso that errors, for instance in printing, setting and/or typing, may occur; such information is subject to change without notice. Please note that model specifications may vary from country to country. In the case of coated surfaces, there may be color differences due to the usual process fluctuations. The consumption values stated refer to the roadworthy series condition of the vehicles at the time of factory delivery.

Evolution and adaption are critical when it comes to maintaining one's status as the top dog. The KTM 1290 SUPER DUKE R EVO is a BEAST - evolved. Boasting intuitive Semi-Active Suspension Technology (SAT), this BEAST not only adapts to the road surface but also to the rider's inputs - making it a cold, calculated hunter. A frightening prospect for any would-be challenger.ENGINE & EXHAUSTEngine: If it ain't broken, don't fix it. But by all means, make it meaner! Boasting 180 hp and 140 Nm, the 1301 cc LC8, V-Twin has undergone a subtle yet impactful development. Optimized to be lighter but retaining its torquey character, this powerhouse is the benchmark of V-twin evolution. And with engine and linkage mounts that add to the overall structure of the entire package - it quite literally is the part that holds THE BEAST together.Engine Case: Thinner engine casings and revised water and oil cooler mounts have resulted in a 0.8 kg weight saving, compared to the previous generation. Oil delivery has also been improved by way of a lightweight aluminum oil line, eliminating the need for a double wall system. Additionally, the engine carrier bracket and linkage mount have been integrated into the engine case, allowing for a stiffer connection. This has also resulted in a 5 mm higher swingarm pivot for improved stability and anti-squat.Injectors: Top feeder injectors and 56 mm throttle bodies provide an improved air to fuel mixture at high rpms. This results in more torque and better fuel economy throughout the rev range.Gearbox: You don't always need big changes to make big differences. In fact, when it comes to the PANKL transmission, we've made a few small tweaks which have resulted in quicker shift times, shorter shift action and lighter lever modulation. Smoother shift action also comes courtesy of an improved spline shaft and bronzed copper coating on the shift forks. Why do all this? Quite simply - quicker shift times equal faster acceleration.Twin Spark Ignition: When it comes to burning fuel efficiently, two sparks are better than one. The twin spark ignition system makes use of more powerful ignition coils and two spark plugs in each cylinder head. This makes for an optimized firing sequence, resulting in more power, better control, lower fuel consumption and lower emissions.Air Intake: To perform like a BEAST, the KTM 1290 SUPER DUKE R EVO needs to breath like a BEAST. Thanks to a ram air intake positioned in the headlight mask, this rip snorting arrangement maximizes flow by forcing air into the combustion chambers. This in turn reduces the chance of low air pressure and increases the fuel burn rate. The addition of a newly designed and easy-to-access air filter box makes for easy servicing too.Titanium Inlet Valves: State-of-the-art, machined titanium inlet valves with chromium nitride PVD coating - how impressive does that sound? These feature a flat design, and weigh 19 grams less than steel inlet valves. When combined with the meticulously engineered cylinder heads and combustion chambers on the KTM 1290 SUPER DUKE R EVO, offering a compression ratio of 13.6:1, there is ultimately one outcome, pure power.Cylinder Heads: Thanks to the resonator chambers on the cylinder heads, which have been engineered to increase the torque output in the lower to mid-range rpms, the KTM 1290 SUPER DUKE R EVO pulls like a train, while keeping fuel consuption and CO² emissions in check.PASC Clutch: While the pressure lubricated PASC slipper clutch allows for feather-light clutch modulation while accelerating, it's how it handles slowing down that's the really impressive bit. When the engine experiences extreme back-torque during aggressive downshifting from speed, the clutch opens to prevent the rear wheel locking, giving the rider full control and perfect entry speed while hunting apexes.Ride-By-Wire: A new quick turn throttle twist grip has been added to the KTM 1290 SUPER DUKE R EVO's arsenal. With the twist-action reduced by 7 degrees, this R&D-developed solution not only offers faster and more responsive throttle input but also reduces the rider wrist angle and elbow drop at full-throttle. This is paired with buttery-smooth ride by wire which electronically translates the throttle commands of the rider into the best throttle valve positions for the current riding situation. Choking, jolting and involuntary wheelies are a thing of the past. Voluntary ones, however, could easily be a thing of your futureCrankcase: In the battle of physics and blasting holes in the space-time continuum, lighter is faster. But when you're working with a pure naked BEAST, finding the places to trim fat is often a challenge. Weight has been shaved off the crankcases, by making them marginally thinner, which, when combined with a new water pump and lighter clutch cover, provides a substantial overall weight saving.Pistons: Formula1-inspired forged piston technology means we can push the limits of load capacity despite the extremely short and lightweight design. This results in minimized reciprocating weight and maximized responsiveness. The piston skirts also feature a state-of-the-art, hard anodized finish which minimizes friction, adding to the engine's free-revving nature. What's more, the hard-wearing durability of these parts add many years to an already impressive engine life.Exhaust: This is not a case of "bark being worse than bite" - this BEAST roars! Up to 60 mm of drainpipe-like dimensions at the headers optimize gas flow, while 2 catalytic converters control emissions, without compromising the V-twin engine note or horsepower.Airfilter: Gone are the days of complicated air-filter maintainence. Thanks top an easy-to-access air filter box, swapping out your air filter for a fresh set of lungs is as easy as making sportsbike riders cry. CHASSISFrame: The frame, which uses the engine as a means to increase torsional rigidity, has resulted in the KTM 1290 SUPER DUKE R EVO being 3 times stiffer than its predecessor. This allows for an effortless, confidence-inspiring riding position which translate into an ultimately faster ride. This is achieved by maximizing the feedback from the chassis and the front tire. The frame also makes use of thicker diameter tubes with thinner walls, which is the single biggest weight saving measure on the bike - saving 2 kg compared to the previous generation model.Subframe: Multi-dexterity is the name of the game when it comes to this BEAST's tail. A lightweight composite subframe combines a number of functions to save weight and increase functionality. The passenger seat, license plate holder and tail lights bolt directly onto the subframe structure with no additional brackets or attachments needed.Swingarm: To increase feel and traction, the pivot point of the single-sided swingarm is positioned 5mm higher relative to the front sprocket for more control when putting the power down. Combined with the repositioning of the engine in the frame, a steeper swingarm angle has been achieved, increasing anti-squat compared to the previous generation.Semi-Active Suspension: With its ability to adapt to the road conditions and rider inputs, the KTM 1290 SUPER DUKE R EVO's new WP Semi-Active Technology (SAT) transforms this BEAST from a stone-cold hunter to a calculated apex predator. As the most advanced suspension system on the market, the WP SAT features newly developed electronically controlled magnetic valves for variable damping, providing a wide range of adjustability from maximum street comfort to extreme track-ready stiffness.Front Fork: 48mm WP APEX forks feature Electronically controlled damping that feels more conventional and less intrusive. This was achieved by using Pulse Width Modulation stroke sensors which offer finer and more responsive stroke signals and a faster responding SAT valve. The end result? Seamless suspension adjustment with the rider left to simply get on with the job of riding.Triple Clamp: Lightweight, forged aluminum triple clamps with an offset of 32 mm have been matched to an aluminum steering column for added weight savings. Essentially, this is the bit that connects the nut holding the handlebars to the front end.Shock Absorber: Combined with SUSPENSION PRO. the shock absorber features an all-new automatic preload adjuster which uses a stroke sensor that enables the SAT system to recognize how much load there is on the motorcycle, effecting an automatic preload of the spring for perfect balance geometry and sag. These can be adjusted via three modes - LOW, STANDARD, HIGH. Alternatively the rider can adjust between 0% and 100% in increments of 10%. All settings for the suspension can be performed via the dashboard and the modes/settings are indicated on the TFT screen.Suspension Pro: SUSPENSION PRO allows riders to select three additional suspension settings, namely TRACK, AUTO, and ADVANCED, whereby riders can achieve ultimate TRACK settings, ask the machine to automatically adjust the suspension based on their current riding situation, or deep-dive into the ADVANCED settings for suspension fine-tuning.Linkage: Through the power of leverage, the linkage at the rear helps to smooth out rough roads, while still ensuring that full-attack track action remains uncompromised. The progressive damping character also ensures optimized damping and bottoming out resistance.Wheels: These wheels didn't just happen by the grace of a designer's pen - they are the product of a sophisticated CAD system, which determines the best shape in terms of strength and lightness. What that means is that these wheels are engineered down to the finest detail, they are lighter than before and look great.Tires: BRIDGESTONE S22 tires - 120/70/17 in the front and 200/55/17 in the rear - are specifically developed for the KTM 1290 SUPER DUKE R EVO. Featuring a fine-particle silica compound, they offer much-improved grip in wet weather conditions, making for exceptional characteristics on the road but also phenomenal handling on the track.Brakes: Reigning this BEAST comes courtesy of 4-piston BREMBO Stylema monobloc calipers clamping onto 320 mm floating discs up front, and a twin piston floating caliper biting a 240 mm disc at the rear. ERGONOMICS & COMFORTHandlebar: Finding the optimal seating position is made easy with an adjustable 760 mm wide handlebar. Riders can tailor their preferred reach with 4 positions over 22 mm, front to back, making it easy to attack corners and crucial for hanging on down the straights.Menu Switch: The KTM 1290 SUPER DUKE R EVO boasts an intuitive TFT dashboard with multi-functionality. To access this, robust, tactile motorcycle switchgear has been developed - which incidentally push all the right buttons. Riders can adjust the wheel slip easily via paddle buttons on the switchgear, while in TRACK MODE, or can set two programmable switches for fast access to favored features or setting of their choosing.Hand Levers: Hydraulic brake and clutch levers make for easy one-finger operation, while full reach adjustability ensures they are within easy grasp of even the most reach-challenged riders.Seats: There's no doubting THE BEAST's performance credentials. But that doesn't mean riders have to sacrifice long-distance comfort either. While the KTM 1290 SUPER DUKE R EVO is at home on the track, it's a naked street bike first. This means passenger comfort has been thoroughly thought-out and has been designed to allow for real-world, 2-up riding.Footpegs: Big lean angles come as standard, thanks to smart positioning of the foot pegs, which also allow for comfort on the road. However, further refinement is also possible with two positions, which lift the pegs higher and further backwards for a more aggressive stance. And as can be expected, the gear shift pattern can be easily reversed to a 5 down, 1 up arrangement for full BEAST MODE track attacks. Shift and brake levers are fully adjustable too. SOFTWARE & ELECTRONICSLED Headlight: While the headlight mask doubles as an intake snorkel, it's the twin LED headlights that really shine. Sharp, menacing lines enhance THE BEAST's overall look, while providing ample illumination when it gets dark. Daytime running lights also ensure you will get noticed, which not only earns you kudos when it comes to street cred, but more importantly, makes you more visible to other road users.Rider Aids: Many traditionalists might frown at the sight of electronic rider aids, saying they interfere with the purity of the ride. However, when it comes to the KTM 1290 SUPER DUKE R EVO, all electronic features have received an update, providing more feedback from the engine, and less intrusiveness from the safety systems. To say it simply - smarter systems, more performance.Ride Modes: In a bid for ultimate control, the KTM 1290 SUPER DUKE R EVO features highend traction control, anti-wheelie functionality and ride modes.Rain modeRain mode" is the no-brainer setting for slippery conditions, resulting in maximum traction control, ultra-smooth throttle response and less power, keeping the front wheel on the tarmac when you really need it.Street modeJust like it sounds, "Street mode" is made for the daily grind on everyday roads. Full power, default throttle response and limited slip traction control keeps things controlled on the road. Sport modeDialled in for a more spirited ride, "Sport mode" tightens up the throttle control, winds down the traction control slightly and allows the front end to lift under hard acceleration. And of course - unleashes all the horse power.Track Mode: The optional "Track mode" allows riders to customize wheel slip levels and throttle response to suit their own individual tastes or track conditions. Traction control can be tweaked over 9 levels of slip while MSC is disabled completely. Anti-wheelie can also be disabled completely for those who like to hoist the front wheel across the start/finish line.Performance Mode: An optional "Performance mode" takes the basic concept of "Track mode" but adapts it for the street. Riders are still able to adjust throttle response, wheel slip and anti-wheelie functions, but retain typical street functions such as Cruise Control and KTM MY RIDE.MTC: Motorcycle traction control - or MTC for short - uses two different controllers to keep things in check. The most obvious of which is a wheel slip controller which regulates the amount of spin or break in traction at the rear wheel. A pitch angle controller identifies and regulates abrupt changes in front wheel lift. Each of these controllers work with individual strategies to ensure a seamless "behind-the-scenes" safety net is always in play. While the safety benefits are obvious, this also results in improved straight-line acceleration.MTC also works when lean angles get tested, reacting immediately if the rotational speed of the rear wheel is disproportionate to the riding situation. MTC reduces the engine output with an extremely smooth, barely noticeable intervention at the throttle valves, reducing slippage to optimum levels for the selected ride mode and lean angle. Depending on the selected riding mode, MTC allows different levels of traction slip at the rear wheel. And of course, MTC can be switched off completely for the full BEAST experience.MSR: Unlike MTC which works when the power gets rolled on, MSR works when the power is wound off. MSR (optional), or Motor Slip Regulation, works with the slipper clutch to balance the throttle, ensuring super-smooth deceleration in the harshest conditions without any unwanted rear wheel lockup. This is deactivated in "Track" and "Supermoto ABS" modes, to allow riders to back the bike into corners - as you would expect.Supermoto ABS: Three things happen when riders select "Supermoto ABS". First, all ABS functionality is disabled on the rear wheel, allowing the riders to lock up the brakes and slide into corners. Secondly, the ABS system does not interfere in the event of the rear wheel lifting off the tarmac, allowing for stoppies. And thirdly, cornering ABS is disabled, allowing riders full control when barreling into fast corners with maximum brake pressure. All in all, the deactivation of these functions in "Supermoto ABS" gives the rider more control in extreme track scenarios and allows advanced riders to brake much harder for maximum apex-hunting sessions.Cruise Control: Long motorway journeys are easily dispatched with the SUPER DUKE R EVO's cruise control system. Easily activated and controlled by a switch on the left hand side of the handlebar, riders can set cruise control in 3rd, 4th, 5th and 6th gear, between 40 km/h and 200 km/h. That's one way to save energy for the twisty bits.TPMS: As its name implies, the TPMS monitors tire pressure and warns riders of potential tire damage in the event of pressure loss on the TFT display. An added convenience when you want to spend more time on the road and less time checking air pressures.Atir: Auto-cancelling turn signals are a big improvement in terms of safety, as it is now impossible to forget that they are activated and flashing into infinitum. Indicators stop flashing after 10 seconds and in 150 meters.KTM Race On System: Forget about ignition keys and mechanically locked fuel caps, the KTM 1290 SUPER DUKE R EVO features KTM RACE ON! All you need is the transponder key in your pocket and you can unlock THE BEAST.KTM Myride: KTM MY RIDE puts you in control of your smartphone, without losing control of the bars. By using a mobile app on your smart device, KTM MY RIDE givies you turn-by-turn navigation, access your music library and allows you to make and receive phone calls on the fly - right from your dashboard. BODYWORK & GRAPHICSBodywork: There isn't much to say about the bodywork of the new KTM 1290 SUPER DUKE R EVO as there is so little of it to talk about. But that's exactly how we like it! Aggressive and menacing, the bodywork and panels had to achieve two objectives - tick all the ergonomic boxes and shave weight wherever possible. As such, every panel and plate has been calculated for optimum thickness and minimized where possible. The only thing that remained heavy was attitude.Sharp Rear End: Thanks to a lightweight composite subframe, the passenger seat, license plate holder and tail lights could be seamlessly incorporated into a neat rear end, which keeps a little sting in the tail.Air Intake: Almost mantis-like, the LED headlight doubles as a ram air intake, with air being channeled between the lights, keeping them cool, and directly into the air filter box, making for a more efficient burn. Besides looking great, the dual-functionality resulted in cleaner, more compact lines and less overall weight.Tank: Crafted from steel, the 16 liter fuel tank has been made to bulk up THE BEAST's haunches. Also, the new shape and angle have been designed to support the rider on street and on the track.Graphics: There's no mistaking that this is the meanest bike on the block. A high-quality application process has been used to ensure the signature 'R' graphics stay put and never fade, while contrasting colors, tones and textures set the muscled creases of the KTM 1290 SUPER DUKE R off perfectly. ENGINE SPECIFICATIONSTransmission: 6-speedCooling: Liquid cooledPower in KW: 132 kWStarter: Electric starterStroke: 71 mmBore: 108 mmClutch: PASC™ slipper clutch, hydraulically actuatedDisplacement: 1301 cm³EMS: Keihin EMS with RBW and cruise control, double ignitionDesign: 2-cylinder, 4-stroke, V 75°Lubrication: Forced oil lubrication with 3 oil pumps CHASSIS SPECIFICATIONSABS: Bosch 9.1MP 2.0 (with cornering ABS and SUPERMOTO ABS)Front brake disc diameter: 320 mmRear brake disc diameter: 240 mmChain: 525 X-RingFrame design: Chrome-moly tubular space frame, powder-coatedFront suspension: WP Semi-active Suspension USD Ø 48 mm (GEN.2)Rear suspension: WP Semi-active Rear Shock (GEN.2)Steering head angle: 64.8 ° NOTES:The illustrated vehicles may vary in selected details from the production models and some illustrations feature optional equipment available at additional cost. All information concerning the scope of supply, appearance, services, dimensions and weights is non-binding and specified with the proviso that errors, for instance in printing, setting and/or typing, may occur; such information is subject to change without notice. Please note that model specifications may vary from country to country. In the case of coated surfaces, there may be color differences due to the usual process fluctuations. The consumption values stated refer to the roadworthy series condition of the vehicles at the time of factory delivery.